Você não está autenticado.

Anúncio

Arch Linux Brasil está precisando de sua colaboração para realizar o pagamento do domínio e do host, para colaborar, realizar doações via paypal.

Para mais informações: contato at archlinux-br.org.

#1 10/09/2019 22:42:56

nemenlsk
Membro
Registrado: 06/02/2017
Mensagens: 30

Erros no boot

Olá pessoal,

ao fazer a pós instalação

[[email protected] ~]$ journalctl -p 3 -xb

-- Logs begin at Tue 2019-09-10 14:34:49 -03, end at Tue 2019-09-10 21:36:34 -03. --
set 10 20:09:48 navoo kernel: iTCO_wdt iTCO_wdt: can't request region for resource [mem 0x00c5fffc-0x00c5ffff]
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER:   device [8086:9db1] error status/mask=00000001/00002000
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER:    [ 0] RxErr                  (First)
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER:   device [8086:9db1] error status/mask=00000081/00002000
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER:    [ 0] RxErr                  (First)
set 10 20:09:48 navoo kernel: pcieport 0000:00:1d.1: AER:    [ 7] BadDLLP               
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER:   device [8086:9db1] error status/mask=00000001/00002000
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER:    [ 0] RxErr                  (First)
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER: PCIe Bus Error: severity=Corrected, type=Data Link Layer, (Transmitter ID)
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER:   device [8086:9db1] error status/mask=00001000/00002000
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER:    [12] Timeout               
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER: PCIe Bus Error: severity=Corrected, type=Physical Layer, (Receiver ID)
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER:   device [8086:9db1] error status/mask=00000001/00002000
set 10 20:09:49 navoo kernel: pcieport 0000:00:1d.1: AER:    [ 0] RxErr                  (First)

está instalado em um notebook com placa de vídeo híbrida.

[email protected] ~]$ lspci | grep -i --color 'vga\|3d\|2d'
00:02.0 VGA compatible controller: Intel Corporation UHD Graphics 620 (Whiskey Lake)
01:00.0 3D controller: NVIDIA Corporation GM108M [GeForce MX130] (rev ff)

Há como corrigir esses erros no boot?

Offline

Rodapé do site