Você não está autenticado.

Anúncio

Arch Linux Brasil está precisando de sua colaboração para realizar o pagamento do domínio e do host, para colaborar, realizar doações via [email protected]

Para mais informações: [email protected]

#1 19/12/2017 23:25:56

MLagoa
Membro
De: Mundo Novo - MS
Registrado: 13/05/2016
Mensagens: 33

Preciso apertar botão "reset" para inicializar!

Olá!
Não sei se foi alguma atualização de kernel ou de algum outro componente importante do sistema (sempre atualizo meu sistema pelo # pacman -Syu), mas de uns dias pra cá tem ficado estranho meu PC.
Eu ligo o computador e após alguns "flash" na tela negra, o monitor entra em modo de "sem sinal", enquanto o PC continua aparentemente funcionando.
Para abrir a tela do gerenciador de login (eu uso o Slim), preciso às vezes apertar o botão "reset" no gabinete do PC.
Já pensei que talvez fosse a bateria da motherboard, mas minha placa-mãe é nova...
Também tenho recurso de UEFI na placa, mas não lembro se estou usando um grub próprio p/ boot's EFI ou se instalei o grub normal, para BIOS (Modo Legacy)...
a) Gostaria de saber qual tipo de boot meu computador está usando (se está iniciando pela BIOS ou UEFI). Tem algum comando para descobrir isso?
b) Problemas com o Grub é só uma intuição minha. De repente não é nele o problema. Somente acho estranho o fato de a tela ficar toda negra e eu precisar resetar o PC para abrir o gerenciador de login...
c) Outro problema que eu notei: O ícone de som na bandeja (uso o ambiente XFCE) também ficou inexplicavelmente com um "x" de mudo. Não está mudo, porque se eu acionar o VLC ou passar o mouse sobre o ícone, ele mostra outra vez que está com som. Mas ficou assim de repente, sem nenhuma explicação. Por isso eu penso que o problema foi de alguma atualização do ArchLinux, depois de algum comando # pacman -Syu.
d) Existe algum comando de diagnóstico que varre toda a instalação do Archlinux e aponta erros e instalações quebradas?

Obs: Também sei gerar arquivo de mensagens do boot através do comando dmesg... Mas não sei como usá-lo depois para fazer o diagnóstico do PC!!    :S
Caso seja útil para consertar o que há de errado no meu computador, vou deixar abaixo as mensagens gravadas pelo dmesg.

Agradeço a atenção.

[    0.000000] Linux version 4.14.6-1-ARCH ([email protected]) (gcc version 7.2.1 20171128 (GCC)) #1 SMP PREEMPT Thu Dec 14 21:26:16 UTC 2017
[    0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8438e296-9c2b-4b48-89bf-3271841ad474 rw quiet loglevel=3 vga=current
[    0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[    0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[    0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using 'compacted' format.
[    0.000000] e820: BIOS-provided physical RAM map:
[    0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009c3ff] usable
[    0.000000] BIOS-e820: [mem 0x000000000009c400-0x000000000009ffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bbcf5fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bbcf6000-0x00000000bbd24fff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000bbd25000-0x00000000bd836fff] usable
[    0.000000] BIOS-e820: [mem 0x00000000bd837000-0x00000000bd837fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000bd838000-0x00000000bd851fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000bd852000-0x00000000c276afff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c276b000-0x00000000c3e4afff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c3e4b000-0x00000000c3e6dfff] ACPI data
[    0.000000] BIOS-e820: [mem 0x00000000c3e6e000-0x00000000c406bfff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c406c000-0x00000000c47a2fff] ACPI NVS
[    0.000000] BIOS-e820: [mem 0x00000000c47a3000-0x00000000c52fefff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000c52ff000-0x00000000c52fffff] usable
[    0.000000] BIOS-e820: [mem 0x00000000c5300000-0x00000000c7ffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fe000000-0x00000000fe010fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[    0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[    0.000000] BIOS-e820: [mem 0x0000000100000000-0x0000000236ffffff] usable
[    0.000000] NX (Execute Disable) protection: active
[    0.000000] random: fast init done
[    0.000000] SMBIOS 3.0.0 present.
[    0.000000] DMI: System manufacturer System Product Name/H110M-K, BIOS 2003 09/19/2016
[    0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[    0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[    0.000000] e820: last_pfn = 0x237000 max_arch_pfn = 0x400000000
[    0.000000] MTRR default type: write-back
[    0.000000] MTRR fixed ranges enabled:
[    0.000000]   00000-9FFFF write-back
[    0.000000]   A0000-BFFFF uncachable
[    0.000000]   C0000-FFFFF write-protect
[    0.000000] MTRR variable ranges enabled:
[    0.000000]   0 base 00E0000000 mask 7FE0000000 uncachable
[    0.000000]   1 base 00D0000000 mask 7FF0000000 uncachable
[    0.000000]   2 base 00C8000000 mask 7FF8000000 uncachable
[    0.000000]   3 base 00C6000000 mask 7FFE000000 uncachable
[    0.000000]   4 base 00C5800000 mask 7FFF800000 uncachable
[    0.000000]   5 disabled
[    0.000000]   6 disabled
[    0.000000]   7 disabled
[    0.000000]   8 disabled
[    0.000000]   9 disabled
[    0.000000] x86/PAT: Configuration [0-7]: WB  WC  UC- UC  WB  WP  UC- WT 
[    0.000000] e820: last_pfn = 0xc5300 max_arch_pfn = 0x400000000
[    0.000000] found SMP MP-table at [mem 0x000fcbc0-0x000fcbcf] mapped at [ffffffffff200bc0]
[    0.000000] Scanning 1 areas for low memory corruption
[    0.000000] Base memory trampoline at [ffff928a80096000] 96000 size 24576
[    0.000000] Using GB pages for direct mapping
[    0.000000] BRK [0x86213000, 0x86213fff] PGTABLE
[    0.000000] BRK [0x86214000, 0x86214fff] PGTABLE
[    0.000000] BRK [0x86215000, 0x86215fff] PGTABLE
[    0.000000] BRK [0x86216000, 0x86216fff] PGTABLE
[    0.000000] BRK [0x86217000, 0x86217fff] PGTABLE
[    0.000000] BRK [0x86218000, 0x86218fff] PGTABLE
[    0.000000] BRK [0x86219000, 0x86219fff] PGTABLE
[    0.000000] BRK [0x8621a000, 0x8621afff] PGTABLE
[    0.000000] BRK [0x8621b000, 0x8621bfff] PGTABLE
[    0.000000] BRK [0x8621c000, 0x8621cfff] PGTABLE
[    0.000000] BRK [0x8621d000, 0x8621dfff] PGTABLE
[    0.000000] RAMDISK: [mem 0x37297000-0x37942fff]
[    0.000000] ACPI: Early table checksum verification disabled
[    0.000000] ACPI: RSDP 0x00000000000F05B0 000024 (v02 ALASKA)
[    0.000000] ACPI: XSDT 0x00000000BBCF60A0 0000B4 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FACP 0x00000000BBD19320 00010C (v05 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: DSDT 0x00000000BBCF61E8 023134 (v02 ALASKA A M I    01072009 INTL 20120913)
[    0.000000] ACPI: FACS 0x00000000C47A2F80 000040
[    0.000000] ACPI: APIC 0x00000000BBD19430 000068 (v03 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FPDT 0x00000000BBD19498 000044 (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: FIDT 0x00000000BBD194E0 00009C (v01 ALASKA A M I    01072009 AMI  00010013)
[    0.000000] ACPI: MCFG 0x00000000BBD19580 00003C (v01 ALASKA A M I    01072009 MSFT 00000097)
[    0.000000] ACPI: HPET 0x00000000BBD195C0 000038 (v01 ALASKA A M I    01072009 AMI. 0005000B)
[    0.000000] ACPI: SSDT 0x00000000BBD195F8 00036D (v01 SataRe SataTabl 00001000 INTL 20120913)
[    0.000000] ACPI: LPIT 0x00000000BBD19968 000094 (v01 INTEL  SKL      00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BBD19A00 000248 (v02 INTEL  sensrhub 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BBD19C48 002BAE (v02 INTEL  PtidDevc 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BBD1C7F8 000BE3 (v02 INTEL  Ther_Rvp 00001000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BBD1D3E0 0004A3 (v02 INTEL  zpodd    00001000 INTL 20120913)
[    0.000000] ACPI: DBGP 0x00000000BBD1D888 000034 (v01 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: DBG2 0x00000000BBD1D8C0 000054 (v00 INTEL           00000000 MSFT 0000005F)
[    0.000000] ACPI: SSDT 0x00000000BBD1D918 000705 (v02 INTEL  xh_rvp08 00000000 INTL 20120913)
[    0.000000] ACPI: SSDT 0x00000000BBD1E020 005359 (v02 SaSsdt SaSsdt   00003000 INTL 20120913)
[    0.000000] ACPI: UEFI 0x00000000BBD23380 000042 (v01                 00000000      00000000)
[    0.000000] ACPI: SSDT 0x00000000BBD233C8 000E73 (v02 CpuRef CpuSsdt  00003000 INTL 20120913)
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] No NUMA configuration found
[    0.000000] Faking a node at [mem 0x0000000000000000-0x0000000236ffffff]
[    0.000000] NODE_DATA(0) allocated [mem 0x236ffa000-0x236ffdfff]
[    0.000000] Zone ranges:
[    0.000000]   DMA      [mem 0x0000000000001000-0x0000000000ffffff]
[    0.000000]   DMA32    [mem 0x0000000001000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x0000000236ffffff]
[    0.000000]   Device   empty
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000000001000-0x000000000009bfff]
[    0.000000]   node   0: [mem 0x0000000000100000-0x00000000bbcf5fff]
[    0.000000]   node   0: [mem 0x00000000bbd25000-0x00000000bd836fff]
[    0.000000]   node   0: [mem 0x00000000bd852000-0x00000000c276afff]
[    0.000000]   node   0: [mem 0x00000000c3e6e000-0x00000000c406bfff]
[    0.000000]   node   0: [mem 0x00000000c52ff000-0x00000000c52fffff]
[    0.000000]   node   0: [mem 0x0000000100000000-0x0000000236ffffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000000001000-0x0000000236ffffff]
[    0.000000] On node 0 totalpages: 2070715
[    0.000000]   DMA zone: 64 pages used for memmap
[    0.000000]   DMA zone: 21 pages reserved
[    0.000000]   DMA zone: 3995 pages, LIFO batch:0
[    0.000000]   DMA32 zone: 12389 pages used for memmap
[    0.000000]   DMA32 zone: 792864 pages, LIFO batch:31
[    0.000000]   Normal zone: 19904 pages used for memmap
[    0.000000]   Normal zone: 1273856 pages, LIFO batch:31
[    0.000000] Reserving Intel graphics memory at 0x00000000c6000000-0x00000000c7ffffff
[    0.000000] ACPI: PM-Timer IO Port: 0x1808
[    0.000000] ACPI: Local APIC address 0xfee00000
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[    0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
[    0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-119
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[    0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[    0.000000] ACPI: IRQ0 used by override.
[    0.000000] ACPI: IRQ9 used by override.
[    0.000000] Using ACPI (MADT) for SMP configuration information
[    0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[    0.000000] [Firmware Bug]: TSC_DEADLINE disabled due to Errata; please update microcode to version: 0xb2 (or later)
[    0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[    0.000000] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009c000-0x0009cfff]
[    0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009ffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
[    0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
[    0.000000] PM: Registered nosave memory: [mem 0xbbcf6000-0xbbd24fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd837000-0xbd837fff]
[    0.000000] PM: Registered nosave memory: [mem 0xbd838000-0xbd851fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc276b000-0xc3e4afff]
[    0.000000] PM: Registered nosave memory: [mem 0xc3e4b000-0xc3e6dfff]
[    0.000000] PM: Registered nosave memory: [mem 0xc406c000-0xc47a2fff]
[    0.000000] PM: Registered nosave memory: [mem 0xc47a3000-0xc52fefff]
[    0.000000] PM: Registered nosave memory: [mem 0xc5300000-0xc7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xc8000000-0xf7ffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfdffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe000000-0xfe010fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfe011000-0xfebfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfedfffff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[    0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[    0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[    0.000000] e820: [mem 0xc8000000-0xf7ffffff] available for PCI devices
[    0.000000] Booting paravirtualized kernel on bare hardware
[    0.000000] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
[    0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:2 nr_node_ids:1
[    0.000000] percpu: Embedded 36 pages/cpu @ffff928cb6c00000 s107032 r8192 d32232 u1048576
[    0.000000] pcpu-alloc: s107032 r8192 d32232 u1048576 alloc=1*2097152
[    0.000000] pcpu-alloc: [0] 0 1
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 2038337
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=8438e296-9c2b-4b48-89bf-3271841ad474 rw quiet loglevel=3 vga=current
[    0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[    0.000000] Calgary: detecting Calgary via BIOS EBDA area
[    0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[    0.000000] Memory: 8059984K/8282860K available (6645K kernel code, 1150K rwdata, 2788K rodata, 1312K init, 1008K bss, 222876K reserved, 0K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] ftrace: allocating 29075 entries in 114 pages
[    0.000000] Preemptible hierarchical RCU implementation.
[    0.000000]     RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=2.
[    0.000000]     Tasks RCU enabled.
[    0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 8448, nr_irqs: 512, preallocated irqs: 16
[    0.000000] spurious 8259A interrupt: IRQ7.
[    0.000000] Console: colour VGA+ 80x25
[    0.000000] console [tty0] enabled
[    0.000000] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635855245 ns
[    0.000000] hpet clockevent registered
[    0.003333] tsc: Detected 2800.000 MHz processor
[    0.003333] Calibrating delay loop (skipped), value calculated using timer frequency.. 5618.00 BogoMIPS (lpj=9360000)
[    0.003333] pid_max: default: 32768 minimum: 301
[    0.003333] ACPI: Core revision 20170728
[    0.025294] ACPI Error: [\_SB_.PCI0.XHC_.RHUB.HS11] Namespace lookup failure, AE_NOT_FOUND (20170728/dswload-210)
[    0.025297] ACPI Exception: AE_NOT_FOUND, During name lookup/catalog (20170728/psobject-252)
[    0.025334] ACPI Exception: AE_NOT_FOUND, (SSDT:xh_rvp08) while loading table (20170728/tbxfload-228)
[    0.032169] ACPI Error: 1 table load failures, 8 successful (20170728/tbxfload-246)
[    0.032190] Security Framework initialized
[    0.032191] Yama: becoming mindful.
[    0.032965] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[    0.033410] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
[    0.033428] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.033440] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes)
[    0.033583] CPU: Physical Processor ID: 0
[    0.033584] CPU: Processor Core ID: 0
[    0.033589] mce: CPU supports 8 MCE banks
[    0.033596] CPU0: Thermal monitoring enabled (TM1)
[    0.033608] process: using mwait in idle threads
[    0.033610] Last level iTLB entries: 4KB 128, 2MB 8, 4MB 8
[    0.033611] Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0, 1GB 4
[    0.033668] Freeing SMP alternatives memory: 24K
[    0.034251] smpboot: Max logical packages: 1
[    0.035451] x2apic: IRQ remapping doesn't support X2APIC mode
[    0.038573] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
[    0.073333] smpboot: CPU0: Intel(R) Celeron(R) CPU G3900 @ 2.80GHz (family: 0x6, model: 0x5e, stepping: 0x3)
[    0.083346] Performance Events: PEBS fmt3+, Skylake events, 32-deep LBR, full-width counters, Intel PMU driver.
[    0.083427] ... version:                4
[    0.083428] ... bit width:              48
[    0.083428] ... generic registers:      8
[    0.083428] ... value mask:             0000ffffffffffff
[    0.083429] ... max period:             00007fffffffffff
[    0.083429] ... fixed-purpose events:   3
[    0.083430] ... event mask:             00000007000000ff
[    0.090005] Hierarchical SRCU implementation.
[    0.103421] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[    0.110004] smp: Bringing up secondary CPUs ...
[    0.136686] x86: Booting SMP configuration:
[    0.136689] .... node  #0, CPUs:      #1
[    0.137028] smp: Brought up 1 node, 2 CPUs
[    0.137028] smpboot: Total of 2 processors activated (11236.00 BogoMIPS)
[    0.137790] devtmpfs: initialized
[    0.137790] x86/mm: Memory block size: 128MB
[    0.137790] PM: Registering ACPI NVS region [mem 0xbd837000-0xbd837fff] (4096 bytes)
[    0.137790] PM: Registering ACPI NVS region [mem 0xc406c000-0xc47a2fff] (7565312 bytes)
[    0.137790] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
[    0.137790] futex hash table entries: 512 (order: 3, 32768 bytes)
[    0.137790] pinctrl core: initialized pinctrl subsystem
[    0.137790] RTC time:  6:12:54, date: 12/20/17
[    0.137790] NET: Registered protocol family 16
[    0.140016] cpuidle: using governor ladder
[    0.140042] cpuidle: using governor menu
[    0.140042] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[    0.140042] ACPI: bus type PCI registered
[    0.140042] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[    0.140069] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[    0.140071] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[    0.140076] PCI: Using configuration type 1 for base access
[    0.140474] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.140474] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.140474] ACPI: Added _OSI(Module Device)
[    0.140474] ACPI: Added _OSI(Processor Device)
[    0.140474] ACPI: Added _OSI(3.0 _SCP Extensions)
[    0.140474] ACPI: Added _OSI(Processor Aggregator Device)
[    0.140690] ACPI: Executed 25 blocks of module-level executable AML code
[    0.149919] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[    0.152928] ACPI: Dynamic OEM Table Load:
[    0.152933] ACPI: SSDT 0xFFFF928CAD306800 0005FD (v02 PmRef  Cpu0Ist  00003000 INTL 20120913)
[    0.153113] ACPI: \_PR_.CPU0: _OSC native thermal LVT Acked
[    0.154326] ACPI: Dynamic OEM Table Load:
[    0.154329] ACPI: SSDT 0xFFFF928CACC1A000 00037F (v02 PmRef  Cpu0Cst  00003001 INTL 20120913)
[    0.154974] ACPI: Dynamic OEM Table Load:
[    0.154978] ACPI: SSDT 0xFFFF928CAD301800 0005AA (v02 PmRef  ApIst    00003000 INTL 20120913)
[    0.155386] ACPI: Dynamic OEM Table Load:
[    0.155389] ACPI: SSDT 0xFFFF928CACC0CA00 000119 (v02 PmRef  ApCst    00003000 INTL 20120913)
[    0.156882] ACPI: Interpreter enabled
[    0.156917] ACPI: (supports S0 S3 S4 S5)
[    0.156918] ACPI: Using IOAPIC for interrupt routing
[    0.156948] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[    0.157640] ACPI: Enabled 7 GPEs in block 00 to 7F
[    0.159669] ACPI: Power Resource [PG00] (on)
[    0.159992] ACPI: Power Resource [PG01] (on)
[    0.160284] ACPI: Power Resource [PG02] (on)
[    0.162521] ACPI: Power Resource [WRST] (on)
[    0.162824] ACPI: Power Resource [WRST] (on)
[    0.163125] ACPI: Power Resource [WRST] (on)
[    0.163437] ACPI: Power Resource [WRST] (on)
[    0.163745] ACPI: Power Resource [WRST] (on)
[    0.164048] ACPI: Power Resource [WRST] (on)
[    0.164348] ACPI: Power Resource [WRST] (on)
[    0.164646] ACPI: Power Resource [WRST] (on)
[    0.164945] ACPI: Power Resource [WRST] (on)
[    0.165243] ACPI: Power Resource [WRST] (on)
[    0.165541] ACPI: Power Resource [WRST] (on)
[    0.165842] ACPI: Power Resource [WRST] (on)
[    0.166145] ACPI: Power Resource [WRST] (on)
[    0.166446] ACPI: Power Resource [WRST] (on)
[    0.166754] ACPI: Power Resource [WRST] (on)
[    0.167063] ACPI: Power Resource [WRST] (on)
[    0.167365] ACPI: Power Resource [WRST] (on)
[    0.167664] ACPI: Power Resource [WRST] (on)
[    0.167966] ACPI: Power Resource [WRST] (on)
[    0.168268] ACPI: Power Resource [WRST] (on)
[    0.177992] ACPI: Power Resource [FN00] (off)
[    0.178052] ACPI: Power Resource [FN01] (off)
[    0.178110] ACPI: Power Resource [FN02] (off)
[    0.178166] ACPI: Power Resource [FN03] (off)
[    0.178223] ACPI: Power Resource [FN04] (off)
[    0.179201] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[    0.179206] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[    0.179232] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
[    0.179764] PCI host bridge to bus 0000:00
[    0.179766] pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7 window]
[    0.179767] pci_bus 0000:00: root bus resource [io  0x0d00-0xffff window]
[    0.179768] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[    0.179769] pci_bus 0000:00: root bus resource [mem 0xc8000000-0xf7ffffff window]
[    0.179769] pci_bus 0000:00: root bus resource [mem 0xfd000000-0xfe7fffff window]
[    0.179770] pci_bus 0000:00: root bus resource [bus 00-3e]
[    0.179776] pci 0000:00:00.0: [8086:190f] type 00 class 0x060000
[    0.180049] pci 0000:00:02.0: [8086:1902] type 00 class 0x030000
[    0.180059] pci 0000:00:02.0: reg 0x10: [mem 0xf6000000-0xf6ffffff 64bit]
[    0.180064] pci 0000:00:02.0: reg 0x18: [mem 0xe0000000-0xefffffff 64bit pref]
[    0.180068] pci 0000:00:02.0: reg 0x20: [io  0xf000-0xf03f]
[    0.180228] pci 0000:00:14.0: [8086:a12f] type 00 class 0x0c0330
[    0.180248] pci 0000:00:14.0: reg 0x10: [mem 0xf7110000-0xf711ffff 64bit]
[    0.180311] pci 0000:00:14.0: PME# supported from D3hot D3cold
[    0.180484] pci 0000:00:16.0: [8086:a13a] type 00 class 0x078000
[    0.180508] pci 0000:00:16.0: reg 0x10: [mem 0xf712d000-0xf712dfff 64bit]
[    0.180575] pci 0000:00:16.0: PME# supported from D3hot
[    0.180694] pci 0000:00:17.0: [8086:a102] type 00 class 0x010601
[    0.180711] pci 0000:00:17.0: reg 0x10: [mem 0xf7128000-0xf7129fff]
[    0.180717] pci 0000:00:17.0: reg 0x14: [mem 0xf712c000-0xf712c0ff]
[    0.180724] pci 0000:00:17.0: reg 0x18: [io  0xf090-0xf097]
[    0.180730] pci 0000:00:17.0: reg 0x1c: [io  0xf080-0xf083]
[    0.180737] pci 0000:00:17.0: reg 0x20: [io  0xf060-0xf07f]
[    0.180743] pci 0000:00:17.0: reg 0x24: [mem 0xf712b000-0xf712b7ff]
[    0.180780] pci 0000:00:17.0: PME# supported from D3hot
[    0.180892] pci 0000:00:1c.0: [8086:a114] type 01 class 0x060400
[    0.180950] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[    0.181087] pci 0000:00:1c.7: [8086:a117] type 01 class 0x060400
[    0.181147] pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
[    0.181269] pci 0000:00:1d.0: [8086:a118] type 01 class 0x060400
[    0.181334] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[    0.181475] pci 0000:00:1f.0: [8086:a143] type 00 class 0x060100
[    0.181675] pci 0000:00:1f.2: [8086:a121] type 00 class 0x058000
[    0.181690] pci 0000:00:1f.2: reg 0x10: [mem 0xf7124000-0xf7127fff]
[    0.181838] pci 0000:00:1f.3: [8086:a170] type 00 class 0x040300
[    0.181865] pci 0000:00:1f.3: reg 0x10: [mem 0xf7120000-0xf7123fff 64bit]
[    0.181896] pci 0000:00:1f.3: reg 0x20: [mem 0xf7100000-0xf710ffff 64bit]
[    0.181944] pci 0000:00:1f.3: PME# supported from D3hot D3cold
[    0.182098] pci 0000:00:1f.4: [8086:a123] type 00 class 0x0c0500
[    0.182158] pci 0000:00:1f.4: reg 0x10: [mem 0xf712a000-0xf712a0ff 64bit]
[    0.182226] pci 0000:00:1f.4: reg 0x20: [io  0xf040-0xf05f]
[    0.182435] acpiphp: Slot [1] registered
[    0.182439] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.182495] pci 0000:02:00.0: [10ec:8168] type 00 class 0x020000
[    0.182524] pci 0000:02:00.0: reg 0x10: [io  0xe000-0xe0ff]
[    0.182549] pci 0000:02:00.0: reg 0x18: [mem 0xf7004000-0xf7004fff 64bit]
[    0.182565] pci 0000:02:00.0: reg 0x20: [mem 0xf7000000-0xf7003fff 64bit]
[    0.182653] pci 0000:02:00.0: supports D1 D2
[    0.182654] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[    0.182734] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.182736] pci 0000:00:1c.7:   bridge window [io  0xe000-0xefff]
[    0.182739] pci 0000:00:1c.7:   bridge window [mem 0xf7000000-0xf70fffff]
[    0.182787] acpiphp: Slot [1-1] registered
[    0.182796] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.184581] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
[    0.184620] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.184658] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.184695] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
[    0.184732] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.184769] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.184805] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.184842] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0
[    0.185299] pci 0000:00:02.0: vgaarb: setting as boot VGA device
[    0.185299] pci 0000:00:02.0: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
[    0.185299] pci 0000:00:02.0: vgaarb: bridge control possible
[    0.185299] vgaarb: loaded
[    0.185299] EDAC MC: Ver: 3.0.0
[    0.185299] PCI: Using ACPI for IRQ routing
[    0.192129] PCI: pci_cache_line_size set to 64 bytes
[    0.192166] e820: reserve RAM buffer [mem 0x0009c400-0x0009ffff]
[    0.192167] e820: reserve RAM buffer [mem 0xbbcf6000-0xbbffffff]
[    0.192167] e820: reserve RAM buffer [mem 0xbd837000-0xbfffffff]
[    0.192168] e820: reserve RAM buffer [mem 0xc276b000-0xc3ffffff]
[    0.192168] e820: reserve RAM buffer [mem 0xc406c000-0xc7ffffff]
[    0.192169] e820: reserve RAM buffer [mem 0xc5300000-0xc7ffffff]
[    0.192170] e820: reserve RAM buffer [mem 0x237000000-0x237ffffff]
[    0.192226] NetLabel: Initializing
[    0.192227] NetLabel:  domain hash size = 128
[    0.192227] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    0.192239] NetLabel:  unlabeled traffic allowed by default
[    0.192245] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[    0.192245] hpet0: 8 comparators, 64-bit 24.000000 MHz counter
[    0.194351] clocksource: Switched to clocksource hpet
[    0.199867] VFS: Disk quotas dquot_6.6.0
[    0.199879] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.199916] pnp: PnP ACPI init
[    0.200151] system 00:00: [io  0x0290-0x029f] has been reserved
[    0.200154] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.200429] pnp 00:01: [dma 0 disabled]
[    0.200459] pnp 00:01: Plug and Play ACPI device, IDs PNP0501 (active)
[    0.200515] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[    0.200656] system 00:03: [io  0x0680-0x069f] has been reserved
[    0.200657] system 00:03: [io  0xffff] has been reserved
[    0.200658] system 00:03: [io  0xffff] has been reserved
[    0.200659] system 00:03: [io  0xffff] has been reserved
[    0.200660] system 00:03: [io  0x1800-0x18fe] has been reserved
[    0.200660] system 00:03: [io  0x164e-0x164f] has been reserved
[    0.200663] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.200731] system 00:04: [io  0x0800-0x087f] has been reserved
[    0.200733] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.200745] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[    0.200769] system 00:06: [io  0x1854-0x1857] has been reserved
[    0.200771] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[    0.200968] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
[    0.200969] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
[    0.200969] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
[    0.200970] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
[    0.200971] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
[    0.200972] system 00:07: [mem 0xfed90000-0xfed93fff] has been reserved
[    0.200973] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
[    0.200974] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
[    0.200975] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
[    0.200976] system 00:07: [mem 0xf7fc0000-0xf7fdffff] has been reserved
[    0.200977] system 00:07: [mem 0xc5400000-0xc7fffffe] has been reserved
[    0.200979] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.201004] system 00:08: [mem 0xfd000000-0xfdabffff] has been reserved
[    0.201005] system 00:08: [mem 0xfdad0000-0xfdadffff] has been reserved
[    0.201005] system 00:08: [mem 0xfdb00000-0xfdffffff] has been reserved
[    0.201006] system 00:08: [mem 0xfe000000-0xfe01ffff] could not be reserved
[    0.201007] system 00:08: [mem 0xfe036000-0xfe03bfff] has been reserved
[    0.201008] system 00:08: [mem 0xfe03d000-0xfe3fffff] has been reserved
[    0.201009] system 00:08: [mem 0xfe410000-0xfe7fffff] has been reserved
[    0.201011] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.201251] system 00:09: [io  0xfe00-0xfefe] has been reserved
[    0.201253] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202157] system 00:0a: [mem 0xfdaf0000-0xfdafffff] has been reserved
[    0.202158] system 00:0a: [mem 0xfdae0000-0xfdaeffff] has been reserved
[    0.202159] system 00:0a: [mem 0xfdac0000-0xfdacffff] has been reserved
[    0.202161] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[    0.202847] pnp: PnP ACPI: found 11 devices
[    0.210363] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
[    0.210372] pci 0000:00:1c.0: bridge window [io  0x1000-0x0fff] to [bus 01] add_size 1000
[    0.210374] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000 add_align 100000
[    0.210375] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000 add_align 100000
[    0.210387] pci 0000:00:1d.0: bridge window [io  0x1000-0x0fff] to [bus 03] add_size 1000
[    0.210388] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000 add_align 100000
[    0.210389] pci 0000:00:1d.0: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000 add_align 100000
[    0.210394] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc8000000-0xc81fffff]
[    0.210397] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc8200000-0xc83fffff 64bit pref]
[    0.210398] pci 0000:00:1d.0: BAR 14: assigned [mem 0xc8400000-0xc85fffff]
[    0.210401] pci 0000:00:1d.0: BAR 15: assigned [mem 0xc8600000-0xc87fffff 64bit pref]
[    0.210402] pci 0000:00:1c.0: BAR 13: assigned [io  0x2000-0x2fff]
[    0.210403] pci 0000:00:1d.0: BAR 13: assigned [io  0x3000-0x3fff]
[    0.210405] pci 0000:00:1c.0: PCI bridge to [bus 01]
[    0.210407] pci 0000:00:1c.0:   bridge window [io  0x2000-0x2fff]
[    0.210409] pci 0000:00:1c.0:   bridge window [mem 0xc8000000-0xc81fffff]
[    0.210412] pci 0000:00:1c.0:   bridge window [mem 0xc8200000-0xc83fffff 64bit pref]
[    0.210415] pci 0000:00:1c.7: PCI bridge to [bus 02]
[    0.210417] pci 0000:00:1c.7:   bridge window [io  0xe000-0xefff]
[    0.210420] pci 0000:00:1c.7:   bridge window [mem 0xf7000000-0xf70fffff]
[    0.210425] pci 0000:00:1d.0: PCI bridge to [bus 03]
[    0.210427] pci 0000:00:1d.0:   bridge window [io  0x3000-0x3fff]
[    0.210431] pci 0000:00:1d.0:   bridge window [mem 0xc8400000-0xc85fffff]
[    0.210433] pci 0000:00:1d.0:   bridge window [mem 0xc8600000-0xc87fffff 64bit pref]
[    0.210438] pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7 window]
[    0.210439] pci_bus 0000:00: resource 5 [io  0x0d00-0xffff window]
[    0.210439] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
[    0.210440] pci_bus 0000:00: resource 7 [mem 0xc8000000-0xf7ffffff window]
[    0.210441] pci_bus 0000:00: resource 8 [mem 0xfd000000-0xfe7fffff window]
[    0.210442] pci_bus 0000:01: resource 0 [io  0x2000-0x2fff]
[    0.210442] pci_bus 0000:01: resource 1 [mem 0xc8000000-0xc81fffff]
[    0.210443] pci_bus 0000:01: resource 2 [mem 0xc8200000-0xc83fffff 64bit pref]
[    0.210444] pci_bus 0000:02: resource 0 [io  0xe000-0xefff]
[    0.210445] pci_bus 0000:02: resource 1 [mem 0xf7000000-0xf70fffff]
[    0.210446] pci_bus 0000:03: resource 0 [io  0x3000-0x3fff]
[    0.210446] pci_bus 0000:03: resource 1 [mem 0xc8400000-0xc85fffff]
[    0.210447] pci_bus 0000:03: resource 2 [mem 0xc8600000-0xc87fffff 64bit pref]
[    0.210563] NET: Registered protocol family 2
[    0.210654] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
[    0.210736] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.210817] TCP: Hash tables configured (established 65536 bind 65536)
[    0.210836] UDP hash table entries: 4096 (order: 5, 131072 bytes)
[    0.210852] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
[    0.210886] NET: Registered protocol family 1
[    0.210895] pci 0000:00:02.0: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
[    0.211316] PCI: CLS 0 bytes, default 64
[    0.211340] Unpacking initramfs...
[    0.303613] Freeing initrd memory: 6832K
[    0.303615] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[    0.303617] software IO TLB [mem 0xbe76b000-0xc276b000] (64MB) mapped at [ffff928b3e76b000-ffff928b4276afff]
[    0.303729] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x2879c5f06f2, max_idle_ns: 440795220049 ns
[    0.303783] Scanning for low memory corruption every 60 seconds
[    0.304218] Initialise system trusted keyrings
[    0.304223] Key type blacklist registered
[    0.304278] workingset: timestamp_bits=41 max_order=21 bucket_order=0
[    0.304953] zbud: loaded
[    0.307432] Key type asymmetric registered
[    0.307456] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[    0.307493] io scheduler noop registered
[    0.307493] io scheduler deadline registered
[    0.307520] io scheduler cfq registered (default)
[    0.307521] io scheduler mq-deadline registered
[    0.307521] io scheduler kyber registered
[    0.307536] io scheduler bfq registered
[    0.307940] intel_idle: MWAIT substates: 0x142120
[    0.307940] intel_idle: v0.4.1 model 0x5E
[    0.308008] intel_idle: lapic_timer_reliable_states 0xffffffff
[    0.308168] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.328914] 00:01: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
[    0.329680] rtc_cmos 00:05: RTC can wake from S4
[    0.330090] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[    0.330169] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[    0.330175] intel_pstate: Intel P-state driver initializing
[    0.330318] intel_pstate: HWP enabled
[    0.330357] ledtrig-cpu: registered to indicate activity on CPUs
[    0.330388] vlv2_plat_clk vlv2_plat_clk: vlv2_plat_clk initialized
[    0.330527] NET: Registered protocol family 10
[    0.333085] Segment Routing with IPv6
[    0.333102] NET: Registered protocol family 17
[    0.336587] RAS: Correctable Errors collector initialized.
[    0.336605] microcode: sig=0x506e3, pf=0x2, revision=0x84
[    0.336688] microcode: Microcode Update Driver: v2.2.
[    0.336697] sched_clock: Marking stable (336679547, 0)->(441309271, -104629724)
[    0.336920] registered taskstats version 1
[    0.336925] Loading compiled-in X.509 certificates
[    0.336935] zswap: loaded using pool lzo/zbud
[    0.338912] Key type big_key registered
[    0.339543]   Magic number: 13:342:216
[    0.339569] acpi device:67: hash matches
[    0.339574] acpi device:3a: hash matches
[    0.339580] acpi PNP0C08:00: hash matches
[    0.339716] rtc_cmos 00:05: setting system clock to 2017-12-20 06:12:54 UTC (1513750374)
[    0.341224] Freeing unused kernel memory: 1312K
[    0.341225] Write protecting the kernel read-only data: 12288k
[    0.341570] Freeing unused kernel memory: 1524K
[    0.343538] Freeing unused kernel memory: 1308K
[    0.403095] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[    0.403096] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[    0.403877] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.414242] ACPI: bus type USB registered
[    0.414257] usbcore: registered new interface driver usbfs
[    0.414262] usbcore: registered new interface driver hub
[    0.415722] SCSI subsystem initialized
[    0.417473] usbcore: registered new device driver usb
[    0.418909] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.418914] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
[    0.420044] libata version 3.00 loaded.
[    0.420704] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x00109810
[    0.420712] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[    0.420873] hub 1-0:1.0: USB hub found
[    0.420885] hub 1-0:1.0: 10 ports detected
[    0.421062] xhci_hcd 0000:00:14.0: xHCI Host Controller
[    0.421064] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[    0.421146] hub 2-0:1.0: USB hub found
[    0.421158] hub 2-0:1.0: 4 ports detected
[    0.421460] ahci 0000:00:17.0: version 3.0
[    0.431711] ahci 0000:00:17.0: AHCI 0001.0301 32 slots 4 ports 6 Gbps 0xf impl SATA mode
[    0.431713] ahci 0000:00:17.0: flags: 64bit ncq sntf led clo only pio slum part ems deso sadm sds apst
[    0.457056] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[    0.463919] scsi host0: ahci
[    0.467444] scsi host1: ahci
[    0.470975] scsi host2: ahci
[    0.474518] scsi host3: ahci
[    0.474558] ata1: SATA max UDMA/133 abar [email protected] port 0xf712b100 irq 121
[    0.474559] ata2: SATA max UDMA/133 abar [email protected] port 0xf712b180 irq 121
[    0.474564] ata3: SATA max UDMA/133 abar [email protected] port 0xf712b200 irq 121
[    0.474568] ata4: SATA max UDMA/133 abar [email protected] port 0xf712b280 irq 121
[    0.750037] usb 1-5: new low-speed USB device number 2 using xhci_hcd
[    0.787624] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[    0.788023] ata1.00: ATA-11: KINGSTON SUV400S37240G, 0C3J96R9, max UDMA/133
[    0.788027] ata1.00: 468862128 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[    0.788568] ata1.00: configured for UDMA/133
[    0.789011] scsi 0:0:0:0: Direct-Access     ATA      KINGSTON SUV400S 96R9 PQ: 0 ANSI: 5
[    0.790868] ata4: SATA link down (SStatus 4 SControl 300)
[    0.790969] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[    0.790998] ata3: SATA link down (SStatus 4 SControl 300)
[    0.794016] ata2.00: ATAPI: HL-DT-ST DVDRAM GH24NS50, XP01, max UDMA/100
[    0.797830] ata2.00: configured for UDMA/100
[    0.807085] scsi 1:0:0:0: CD-ROM            HL-DT-ST DVDRAM GH24NS50  XP01 PQ: 0 ANSI: 5
[    0.827944] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[    0.827948] sd 0:0:0:0: [sda] 4096-byte physical blocks
[    0.827960] sd 0:0:0:0: [sda] Write Protect is off
[    0.827963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    0.827980] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    0.829280]  sda: sda1 sda2 sda3
[    0.830075] sd 0:0:0:0: [sda] Attached SCSI disk
[    0.847172] sr 1:0:0:0: [sr0] scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[    0.847177] cdrom: Uniform CD-ROM driver Revision: 3.20
[    0.847940] sr 1:0:0:0: Attached scsi CD-ROM sr0
[    0.900049] hidraw: raw HID events driver (C) Jiri Kosina
[    0.903616] usbcore: registered new interface driver usbhid
[    0.903618] usbhid: USB HID core driver
[    0.905474] input:  USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/0003:15D9:0A4D.0001/input/input1
[    0.905562] hid-generic 0003:15D9:0A4D.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:14.0-5/input0
[    1.101768] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[    1.243524] systemd[1]: RTC configured in localtime, applying delta of -180 minutes to system time.
[    1.273316] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.279476] systemd[1]: systemd 235 running in system mode. (+PAM -AUDIT -SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN default-hierarchy=hybrid)
[    1.279548] systemd[1]: Detected architecture x86-64.
[    1.279803] systemd[1]: Set hostname to <ArchLinux>.
[    1.312169] clocksource: Switched to clocksource tsc
[    1.368905] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[    1.369195] systemd[1]: Created slice System Slice.
[    1.369278] systemd[1]: Created slice system-getty.slice.
[    1.369297] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[    1.370069] systemd[1]: Mounting POSIX Message Queue File System...
[    1.375896] systemd[1]: Listening on Process Core Dump Socket.
[    1.376721] systemd[1]: Mounting Kernel Debug File System...
[    1.391864] EXT4-fs (sda3): re-mounted. Opts: discard,data=ordered
[    1.402454] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    1.403365] sr 1:0:0:0: Attached scsi generic sg1 type 5
[    1.426305] systemd-journald[190]: Received request to flush runtime journal from PID 1
[    1.438593] systemd-journald[190]: File /var/log/journal/0527be4910fe4b60b0c82cc149d33481/system.journal corrupted or uncleanly shut down, renaming and replacing.
[    1.540854] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[    1.540861] ACPI: Sleep Button [SLPB]
[    1.540893] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3
[    1.540897] ACPI: Power Button [PWRB]
[    1.540923] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[    1.540937] ACPI: Power Button [PWRF]
[    1.656152] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[    1.656982] (NULL device *): hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
[    1.657017] thermal LNXTHERM:00: registered as thermal_zone0
[    1.657018] ACPI: Thermal Zone [TZ00] (28 C)
[    1.657120] thermal LNXTHERM:01: registered as thermal_zone1
[    1.657121] ACPI: Thermal Zone [TZ01] (30 C)
[    1.667449] mei_me 0000:00:16.0: enabling device (0000 -> 0002)
[    1.673184] Linux agpgart interface v0.103
[    1.676894] Bluetooth: Core ver 2.22
[    1.676904] NET: Registered protocol family 31
[    1.676905] Bluetooth: HCI device and connection manager initialized
[    1.676907] Bluetooth: HCI socket layer initialized
[    1.676909] Bluetooth: L2CAP socket layer initialized
[    1.676912] Bluetooth: SCO socket layer initialized
[    1.693955] Bluetooth: HCI UART driver ver 2.3
[    1.693957] Bluetooth: HCI UART protocol H4 registered
[    1.693957] Bluetooth: HCI UART protocol BCSP registered
[    1.693971] Bluetooth: HCI UART protocol LL registered
[    1.693972] Bluetooth: HCI UART protocol ATH3K registered
[    1.693972] Bluetooth: HCI UART protocol Three-wire (H5) registered
[    1.693987] Bluetooth: HCI UART protocol Intel registered
[    1.694002] Bluetooth: HCI UART protocol Broadcom registered
[    1.694002] Bluetooth: HCI UART protocol QCA registered
[    1.694003] Bluetooth: HCI UART protocol AG6XX registered
[    1.694003] Bluetooth: HCI UART protocol Marvell registered
[    1.697284] i801_smbus 0000:00:1f.4: SPD Write Disable is set
[    1.697314] i801_smbus 0000:00:1f.4: SMBus using PCI interrupt
[    1.704287] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[    1.704293] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[    1.704642] mousedev: PS/2 mouse device common for all mice
[    1.718106] r8169 0000:02:00.0 eth0: RTL8168h/8111h at 0xffffa7d8c0ffd000, 2c:4d:54:58:48:14, XID 14100800 IRQ 123
[    1.718108] r8169 0000:02:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[    1.739137] Adding 16777212k swap on /dev/sda2.  Priority:-2 extents:1 across:16777212k SSFS
[    1.788626] input: PC Speaker as /devices/platform/pcspkr/input/input5
[    1.820438] RAPL PMU: API unit is 2^-32 Joules, 5 fixed counters, 655360 ms ovfl timer
[    1.820439] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[    1.820440] RAPL PMU: hw unit of domain package 2^-14 Joules
[    1.820440] RAPL PMU: hw unit of domain dram 2^-14 Joules
[    1.820441] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[    1.820441] RAPL PMU: hw unit of domain psys 2^-14 Joules
[    1.842751] SSE version of gcm_enc/dec engaged.
[    1.898437] [drm] Memory usable by graphics device = 4096M
[    1.898439] [drm] Replacing VGA console driver
[    1.899934] Console: switching to colour dummy device 80x25
[    1.905389] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[    1.905390] [drm] Driver supports precise vblank timestamp query.
[    1.906820] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[    1.907769] random: crng init done
[    1.910524] [drm] Finished loading DMC firmware i915/skl_dmc_ver1_26.bin (v1.26)
[    1.912733] [drm] Initialized i915 1.6.0 20170818 for 0000:00:02.0 on minor 0
[    1.914179] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[    1.914398] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[    1.938352] snd_hda_intel 0000:00:1f.3: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[    1.959653] fbcon: inteldrmfb (fb0) is primary device
[    1.965491] asus_wmi: ASUS WMI generic driver loaded
[    1.966576] asus_wmi: Initialization: 0x0
[    1.966594] asus_wmi: BIOS WMI version: 0.9
[    1.966640] asus_wmi: SFUN value: 0x0
[    1.966913] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
[    1.966992] asus_wmi: Number of fans: 1
[    1.972848] iTCO_vendor_support: vendor-support=0
[    1.974506] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[    1.974633] iTCO_wdt: Found a Intel PCH TCO device (Version=4, TCOBASE=0x0400)
[    1.974725] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[    1.978839] r8169 0000:02:00.0 enp2s0: renamed from eth0
[    2.020310] Console: switching to colour frame buffer device 128x48
[    2.038156] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[    2.048378] kvm: disabled by bios
[    2.082822] r8169 0000:02:00.0 enp2s0: link down
[    2.082826] r8169 0000:02:00.0 enp2s0: link down
[    2.082918] IPv6: ADDRCONF(NETDEV_UP): enp2s0: link is not ready
[    2.087586] snd_hda_codec_realtek hdaudioC0D0: autoconfig for ALC887-VD: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
[    2.087587] snd_hda_codec_realtek hdaudioC0D0:    speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[    2.087588] snd_hda_codec_realtek hdaudioC0D0:    hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
[    2.087588] snd_hda_codec_realtek hdaudioC0D0:    mono: mono_out=0x0
[    2.087589] snd_hda_codec_realtek hdaudioC0D0:    dig-out=0x11/0x0
[    2.087589] snd_hda_codec_realtek hdaudioC0D0:    inputs:
[    2.087590] snd_hda_codec_realtek hdaudioC0D0:      Front Mic=0x19
[    2.087591] snd_hda_codec_realtek hdaudioC0D0:      Rear Mic=0x18
[    2.087592] snd_hda_codec_realtek hdaudioC0D0:      Line=0x1a
[    2.106659] kvm: disabled by bios
[    2.112484] input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input8
[    2.112574] input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1f.3/sound/card0/input9
[    2.112607] input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1f.3/sound/card0/input10
[    2.112640] input: HDA Intel PCH Line Out as /devices/pci0000:00/0000:00:1f.3/sound/card0/input11
[    2.112671] input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1f.3/sound/card0/input12
[    2.149492] intel_rapl: Found RAPL domain package
[    2.149493] intel_rapl: Found RAPL domain core
[    2.149494] intel_rapl: Found RAPL domain uncore
[    2.149495] intel_rapl: Found RAPL domain dram
[    2.209273] [drm] RC6 on
[    5.047272] r8169 0000:02:00.0 enp2s0: link up
[    5.047285] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s0: link becomes ready
[   21.641559] fuse init (API version 7.26)

Última edição por MLagoa (20/12/2017 07:23:57)


Ao trocar dois pães, cada um voltará pra casa com um pão. Mas ao trocar ideias, cada um voltará pra casa com duas ideias...

Offline

#2 20/12/2017 19:36:57

swatquest
Moderador
Registrado: 05/10/2010
Mensagens: 1.750

Re: Preciso apertar botão "reset" para inicializar!

qundo for mensagem muito grande coloque dentro do code

[code]aqui[/code]

1- pelo diretório boot e veja se tem uma pasta ou arquivo com estensão efi
2- acho que não é o grub, sobre a tela preta é normal, talvez tenha que configurar o gerenciador de login, ou instlar ou plymouth
3- vc usa o xfce? já tentou resetar a configuraçào.. .renomeie a pasta xfce4 dentro do ~/.config
4- EXiste os logs como journal, mas sem um direção fica difícil.

Você já viu a configuaração do gerenciador de energia. coloque tudo para nunca e veja se o problema persiste

existe o Pacman Log Viewer

vc pode ver o que foi instalado depois do erro

Offline

Rodapé do site