Você não está autenticado.

Anúncio

Arch Linux Brasil está precisando de sua colaboração para realizar o pagamento do domínio e do host, para colaborar, realizar doações via paypal.

Para mais informações: contato at archlinux-br.org.

#1 12/04/2019 15:48:48

willianholtz
Membro
De: Três Barras - SC
Registrado: 23/08/2009
Mensagens: 382

Sistema dando erro coom tela preta (Resolvido)

Pessoal, estou com um problema chato, eu to de boa mexendo no sistema, assistindo, ouvindo um som e do além tudo fica preto e tenho que forçar o desligamento.

Achei que poderia ser algo de hardware, mas tem dias que fica tudo 100%. Hoje aconteceu 2 vezes, uma quando fui aumentar o volume do vlc e outra quando fui ver um video (opera). Estou achando que pode ser kernel panic. Fiz um teste de stress com minha placa gráfica e com meu processador e está ok.

segue o dmesg:

 [ 0.000000] Linux version 5.0.7-arch1-1-ARCH ([email protected]) (gcc version 8.2.1
20181127 (GCC)) #1 SMP PREEMPT Mon Apr 8 10:37:08 UTC 2019
[ 0.000000] Command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw quiet
initrd=../initramfs-linux.img
[ 0.000000] KERNEL supported cpus:
[ 0.000000] Intel GenuineIntel
[ 0.000000] AMD AuthenticAMD
[ 0.000000] Hygon HygonGenuine
[ 0.000000] Centaur CentaurHauls
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
[ 0.000000] x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
[ 0.000000] x86/fpu: Enabled xstate features 0x3, context size is 576 bytes, using
'standard' format.
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000bf8a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a1000-0x00000000bf8a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bf8a7000-0x00000000bf9ccfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bf9cd000-0x00000000bfa0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfa0f000-0x00000000bfb08fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfb09000-0x00000000bfd0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd0f000-0x00000000bfd17fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd18000-0x00000000bfd1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000bfd1f000-0x00000000bfd63fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfd64000-0x00000000bfd9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bfd9f000-0x00000000bfde5fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bfde6000-0x00000000bfdfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bfdff000-0x00000000bfdfffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013fffffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: Dell Inc. Vostro 1520/0T808J, BIOS A04 09/10/2009
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2393.980 MHz processor
[ 0.004522] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.004524] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.004532] last_pfn = 0x140000 max_arch_pfn = 0x400000000
[ 0.004538] MTRR default type: uncachable
[ 0.004539] MTRR fixed ranges enabled:
[ 0.004541] 00000-9FFFF write-back[ 0.004542] A0000-BFFFF uncachable
[ 0.004543] C0000-FFFFF write-protect
[ 0.004544] MTRR variable ranges enabled:
[ 0.004545] 0 base 000000000 mask F80000000 write-back
[ 0.004546] 1 base 080000000 mask FC0000000 write-back
[ 0.004548] 2 base 100000000 mask FC0000000 write-back
[ 0.004549] 3 base 0FFE40000 mask FFFFC0000 write-protect
[ 0.004550] 4 disabled
[ 0.004550] 5 disabled
[ 0.004551] 6 disabled
[ 0.005745] x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT 
[ 0.005899] last_pfn = 0xbfe00 max_arch_pfn = 0x400000000
[ 0.013617] found SMP MP-table at [mem 0x000f6b20-0x000f6b2f] mapped at
[(____ptrval____)]
[ 0.017245] check: Scanning 1 areas for low memory corruption
[ 0.017248] Base memory trampoline at [(____ptrval____)] 99000 size 24576
[ 0.017253] BRK [0x27601000, 0x27601fff] PGTABLE
[ 0.017256] BRK [0x27602000, 0x27602fff] PGTABLE
[ 0.017257] BRK [0x27603000, 0x27603fff] PGTABLE
[ 0.017326] BRK [0x27604000, 0x27604fff] PGTABLE
[ 0.017329] BRK [0x27605000, 0x27605fff] PGTABLE
[ 0.017754] BRK [0x27606000, 0x27606fff] PGTABLE
[ 0.017843] BRK [0x27607000, 0x27607fff] PGTABLE
[ 0.018168] RAMDISK: [mem 0x7f787000-0x7fffffff]
[ 0.018174] ACPI: Early table checksum verification disabled
[ 0.018247] ACPI: RSDP 0x00000000000F6A40 000024 (v02 DELL )
[ 0.018251] ACPI: XSDT 0x00000000BFDF855B 000064 (v01 DELL CL09 06040000 LTP
00000000)
[ 0.018258] ACPI: FACP 0x00000000BFDE8000 0000F4 (v03 TOSCPL CRESTLNE 06040000
ALAN 00000001)
[ 0.018264] ACPI: DSDT 0x00000000BFDE9000 0065B5 (v02 Intel CANTIGA 06040000 INTL
20060608)
[ 0.018268] ACPI: FACS 0x00000000BFD9EFC0 000040
[ 0.018271] ACPI: FACS 0x00000000BFD9EFC0 000040
[ 0.018274] ACPI: HPET 0x00000000BFDFED14 000038 (v01 INTEL CRESTLNE 06040000
LOHR 0000005A)
[ 0.018278] ACPI: MCFG 0x00000000BFDFED4C 00003C (v01 INTEL CRESTLNE 06040000
LOHR 0000005A)
[ 0.018282] ACPI: OSFR 0x00000000BFDFED88 000072 (v01 TOSHIB A+2nd ID 06040000
TASM 04010000)
[ 0.018285] ACPI: APIC 0x00000000BFDFEDFA 000068 (v01 PTLTD ? APIC 06040000 LTP
00000000)[ 0.018289] ACPI: BOOT 0x00000000BFDFEE62 000028 (v01 PTLTD $SBFTBL$ 06040000 
LTP 00000001)
[ 0.018293] ACPI: SLIC 0x00000000BFDFEE8A 000176 (v01 DELL CL09 06040000 LTP
00000000)
[ 0.018297] ACPI: SSDT 0x00000000BFDE7000 000655 (v01 PmRef CpuPm 00003000
INTL 20050624)
[ 0.018308] ACPI: Local APIC address 0xfee00000
[ 0.018402] No NUMA configuration found
[ 0.018403] Faking a node at [mem 0x0000000000000000-0x000000013fffffff]
[ 0.018406] NODE_DATA(0) allocated [mem 0x13fff9000-0x13fffcfff]
[ 0.018433] Zone ranges:
[ 0.018434] DMA [mem 0x0000000000001000-0x0000000000ffffff]
[ 0.018435] DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
[ 0.018437] Normal [mem 0x0000000100000000-0x000000013fffffff]
[ 0.018438] Device empty
[ 0.018439] Movable zone start for each node
[ 0.018440] Early memory node ranges
[ 0.018441] node 0: [mem 0x0000000000001000-0x000000000009efff]
[ 0.018442] node 0: [mem 0x0000000000100000-0x00000000bf8a0fff]
[ 0.018443] node 0: [mem 0x00000000bf8a7000-0x00000000bf9ccfff]
[ 0.018443] node 0: [mem 0x00000000bfa0f000-0x00000000bfb08fff]
[ 0.018444] node 0: [mem 0x00000000bfd0f000-0x00000000bfd17fff]
[ 0.018445] node 0: [mem 0x00000000bfd1f000-0x00000000bfd63fff]
[ 0.018446] node 0: [mem 0x00000000bfd9f000-0x00000000bfde5fff]
[ 0.018447] node 0: [mem 0x00000000bfdff000-0x00000000bfdfffff]
[ 0.018447] node 0: [mem 0x0000000100000000-0x000000013fffffff]
[ 0.018476] Zeroed struct page in unavailable ranges: 1291 pages
[ 0.018477] Initmem setup node 0 [mem 0x0000000000001000-0x000000013fffffff]
[ 0.018479] On node 0 totalpages: 1047285
[ 0.018480] DMA zone: 64 pages used for memmap
[ 0.018481] DMA zone: 21 pages reserved
[ 0.018482] DMA zone: 3998 pages, LIFO batch:0
[ 0.018598] DMA32 zone: 12206 pages used for memmap
[ 0.018599] DMA32 zone: 781143 pages, LIFO batch:63
[ 0.043425] Normal zone: 4096 pages used for memmap
[ 0.043426] Normal zone: 262144 pages, LIFO batch:63
[ 0.052192] ACPI: PM-Timer IO Port: 0x408
[ 0.052195] ACPI: Local APIC address 0xfee00000
[ 0.052205] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.052207] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.052221] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.052223] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)[ 0.052225] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.052227] ACPI: IRQ0 used by override.
[ 0.052228] ACPI: IRQ9 used by override.
[ 0.052230] Using ACPI (MADT) for SMP configuration information
[ 0.052232] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.052241] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.052264] PM: Registered nosave memory: [mem 0x00000000-0x00000fff]
[ 0.052266] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.052266] PM: Registered nosave memory: [mem 0x000a0000-0x000d7fff]
[ 0.052267] PM: Registered nosave memory: [mem 0x000d8000-0x000fffff]
[ 0.052269] PM: Registered nosave memory: [mem 0xbf8a1000-0xbf8a6fff]
[ 0.052271] PM: Registered nosave memory: [mem 0xbf9cd000-0xbfa0efff]
[ 0.052272] PM: Registered nosave memory: [mem 0xbfb09000-0xbfd0efff]
[ 0.052274] PM: Registered nosave memory: [mem 0xbfd18000-0xbfd1efff]
[ 0.052276] PM: Registered nosave memory: [mem 0xbfd64000-0xbfd9efff]
[ 0.052278] PM: Registered nosave memory: [mem 0xbfde6000-0xbfdfefff]
[ 0.052280] PM: Registered nosave memory: [mem 0xbfe00000-0xffffffff]
[ 0.052282] [mem 0xbfe00000-0xffffffff] available for PCI devices
[ 0.052284] Booting paravirtualized kernel on bare hardware
[ 0.052288] clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
6370452778343963 ns
[ 0.233351] random: get_random_bytes called from start_kernel+0x95/0x538 with
crng_init=0
[ 0.233366] setup_percpu: NR_CPUS:320 nr_cpumask_bits:320 nr_cpu_ids:2 nr_node_ids:1
[ 0.234125] percpu: Embedded 45 pages/cpu @(____ptrval____) s147456 r8192 d28672
u1048576
[ 0.234133] pcpu-alloc: s147456 r8192 d28672 u1048576 alloc=1*2097152
[ 0.234134] pcpu-alloc: [0] 0 1 
[ 0.234160] Built 1 zonelists, mobility grouping on. Total pages: 1030898
[ 0.234161] Policy zone: Normal
[ 0.234164] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw quiet
initrd=../initramfs-linux.img
[ 0.256107] Calgary: detecting Calgary via BIOS EBDA area
[ 0.256109] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.291463] Memory: 4019708K/4189140K available (12291K kernel code, 1286K rwdata,
3720K rodata, 1536K init, 3900K bss, 169432K reserved, 0K cma-reserved)
[ 0.291681] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.291694] Kernel/User page tables isolation: enabled
[ 0.291722] ftrace: allocating 35897 entries in 141 pages
[ 0.310694] rcu: Preemptible hierarchical RCU implementation.
[ 0.310696] rcu: 	CONFIG_RCU_FANOUT set to non-default value of 32.
[ 0.310697] rcu: 	RCU dyntick-idle grace-period acceleration is enabled.[ 0.310698] rcu: 	RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=2.
[ 0.310698] rcu: 	RCU priority boosting: priority 1 delay 500 ms.
[ 0.310699] 	Tasks RCU enabled.
[ 0.310700] rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
[ 0.310701] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[ 0.313194] NR_IRQS: 20736, nr_irqs: 440, preallocated irqs: 16
[ 0.313360] rcu: 	Offload RCU callbacks from CPUs: (none).
[ 0.316041] Console: colour VGA+ 80x25
[ 0.316046] printk: console [tty0] enabled
[ 0.316070] ACPI: Core revision 20181213
[ 0.316260] clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
133484882848 ns
[ 0.316270] hpet clockevent registered
[ 0.316276] APIC: Switch to symmetric I/O mode setup
[ 0.316692] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.332943] clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x228200ac089,
max_idle_ns: 440795246694 ns
[ 0.332958] Calibrating delay loop (skipped), value calculated using timer frequency..
4789.45 BogoMIPS (lpj=7979933)
[ 0.332960] pid_max: default: 32768 minimum: 301
[ 0.332999] LSM: Security Framework initializing
[ 0.333001] Yama: becoming mindful.
[ 0.333007] AppArmor: AppArmor disabled by boot time parameter
[ 0.334622] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.335699] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.335759] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.335795] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
[ 0.336145] mce: CPU supports 6 MCE banks
[ 0.336158] mce: CPU0: Thermal monitoring enabled (TM2)
[ 0.336161] process: using mwait in idle threads
[ 0.336166] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
[ 0.336167] Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32, 1GB 0
[ 0.336169] Spectre V2 : Mitigation: Full generic retpoline
[ 0.336170] Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
[ 0.336171] Speculative Store Bypass: Vulnerable
[ 0.336351] Freeing SMP alternatives memory: 32K
[ 0.342944] smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU P8600 @ 2.40GHz (family: 0x6,
model: 0x17, stepping: 0xa)
[ 0.359621] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.359631] ... version: 2
[ 0.359632] ... bit width: 40
[ 0.359632] ... generic registers: 2[ 0.359634] ... value mask: 000000ffffffffff
[ 0.359634] ... max period: 000000007fffffff
[ 0.359635] ... fixed-purpose events: 3
[ 0.359636] ... event mask: 0000000700000003
[ 0.366283] rcu: Hierarchical SRCU implementation.
[ 0.389655] NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
[ 0.396290] smp: Bringing up secondary CPUs ...
[ 0.436301] x86: Booting SMP configuration:
[ 0.436303] .... node #0, CPUs: #1
[ 0.438838] smp: Brought up 1 node, 2 CPUs
[ 0.438838] smpboot: Max logical packages: 1
[ 0.438838] smpboot: Total of 2 processors activated (9579.91 BogoMIPS)
[ 0.439906] devtmpfs: initialized
[ 0.439906] x86/mm: Memory block size: 128MB
[ 0.440352] PM: Registering ACPI NVS region [mem 0xbfd64000-0xbfd9efff] (241664 bytes)
[ 0.440424] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns:
6370867519511994 ns
[ 0.440424] futex hash table entries: 512 (order: 3, 32768 bytes)
[ 0.440424] pinctrl core: initialized pinctrl subsystem
[ 0.440424] RTC time: 17:32:19, date: 2019-04-12
[ 0.440424] NET: Registered protocol family 16
[ 0.440424] audit: initializing netlink subsys (disabled)
[ 0.440424] audit: type=2000 audit(1555090338.123:1): state=initialized audit_enabled=0
res=1
[ 0.442956] cpuidle: using governor ladder
[ 0.442961] cpuidle: using governor menu
[ 0.442981] Simple Boot Flag at 0x36 set to 0x1
[ 0.442998] ACPI: bus type PCI registered
[ 0.443000] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.443086] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff]
(base 0xe0000000)
[ 0.443089] PCI: not using MMCONFIG
[ 0.443091] PCI: Using configuration type 1 for base access
[ 0.447173] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[ 0.447173] ACPI: Added _OSI(Module Device)
[ 0.447173] ACPI: Added _OSI(Processor Device)
[ 0.447173] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.447173] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.447173] ACPI: Added _OSI(Linux-Dell-Video)
[ 0.447173] ACPI: Added _OSI(Linux-Lenovo-NV-HDMI-Audio)
[ 0.447173] ACPI: Added _OSI(Linux-HPI-Hybrid-Graphics)
[ 0.452946] ACPI: 2 ACPI AML tables successfully acquired and loaded[ 0.452946] ACPI: [Firmware Bug]: BIOS _OSI(Linux) query ignored
[ 0.460107] ACPI: Dynamic OEM Table Load:
[ 0.460113] ACPI: SSDT 0xFFFF8D857A985800 000265 (v01 PmRef Cpu0Ist 00003000 INTL
20050624)
[ 0.460552] ACPI: Dynamic OEM Table Load:
[ 0.460557] ACPI: SSDT 0xFFFF8D857A932000 000568 (v01 PmRef Cpu0Cst 00003001 INTL
20050624)
[ 0.461322] ACPI: Dynamic OEM Table Load:
[ 0.461327] ACPI: SSDT 0xFFFF8D857A924A00 0001CF (v01 PmRef ApIst 00003000 INTL
20050624)
[ 0.461636] ACPI: Dynamic OEM Table Load:
[ 0.461640] ACPI: SSDT 0xFFFF8D857AFF1180 00008D (v01 PmRef ApCst 00003000 INTL
20050624)
[ 0.462109] ACPI: EC: EC started
[ 0.462111] ACPI: EC: interrupt blocked
[ 0.462260] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as first EC
[ 0.462263] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.462265] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions
[ 0.462266] ACPI: Interpreter enabled
[ 0.462290] ACPI: (supports S0 S3 S4 S5)
[ 0.462291] ACPI: Using IOAPIC for interrupt routing
[ 0.462328] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff]
(base 0xe0000000)
[ 0.463933] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI
motherboard resources
[ 0.463949] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and
report a bug
[ 0.464293] ACPI: Enabled 14 GPEs in block 00 to 3F
[ 0.541787] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.541794] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM
Segments MSI]
[ 0.541800] acpi PNP0A08:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
[ 0.542666] PCI host bridge to bus 0000:00
[ 0.542669] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7 window]
[ 0.542671] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff window]
[ 0.542673] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
[ 0.542675] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff window]
[ 0.542676] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff window]
[ 0.542678] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff window]
[ 0.542680] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff window]
[ 0.542682] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.542692] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[0.542717] DMAR: Disabling IOMMU for graphics on this chipset
0.542718] DMAR: Forcing write-buffer flush capability
0.542832] pci 0000:00:01.0: [8086:2a41] type 01 class 0x060400
0.542879] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
0.543041] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
0.543100] pci 0000:00:1a.0: reg 0x20: [io 0x1800-0x181f]
0.543265] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
0.543324] pci 0000:00:1a.1: reg 0x20: [io 0x1820-0x183f]
0.543490] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
0.543549] pci 0000:00:1a.2: reg 0x20: [io 0x1840-0x185f]
0.543720] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
0.543746] pci 0000:00:1a.7: reg 0x10: [mem 0xf3304000-0xf33043ff]
0.543849] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
0.543981] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
0.544011] pci 0000:00:1b.0: reg 0x10: [mem 0xf3300000-0xf3303fff 64bit]
0.544116] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
0.544245] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
0.544360] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
0.544501] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
0.544615] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
0.544758] pci 0000:00:1c.2: [8086:2944] type 01 class 0x060400
0.544872] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
0.545011] pci 0000:00:1c.3: [8086:2946] type 01 class 0x060400
0.545125] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
0.545266] pci 0000:00:1c.4: [8086:2948] type 01 class 0x060400
0.545380] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
0.545521] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
0.545635] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
0.545776] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
0.545835] pci 0000:00:1d.0: reg 0x20: [io 0x1860-0x187f]
0.546000] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
0.546060] pci 0000:00:1d.1: reg 0x20: [io 0x1880-0x189f]
0.546222] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
0.546286] pci 0000:00:1d.2: reg 0x20: [io 0x18a0-0x18bf]
0.546453] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
0.546479] pci 0000:00:1d.7: reg 0x10: [mem 0xf3304400-0xf33047ff]
0.546582] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
0.546710] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
0.546902] pci 0000:00:1f.0: [8086:2919] type 00 class 0x060100
0.547156] pci 0000:00:1f.2: [8086:2928] type 00 class 0x01018f
0.547180] pci 0000:00:1f.2: reg 0x10: [io 0x18f0-0x18f7]
0.547191] pci 0000:00:1f.2: reg 0x14: [io 0x18e4-0x18e7][[[[[[[[[[[[[[[[[[[[[[x16[[[[[[[[[[[[[[[[[[[0.547202] pci 0000:00:1f.2: reg 0x18: [io 0x18e8-0x18ef]
0.547213] pci 0000:00:1f.2: reg 0x1c: [io 0x18e0-0x18e3]
0.547224] pci 0000:00:1f.2: reg 0x20: [io 0x18d0-0x18df]
0.547234] pci 0000:00:1f.2: reg 0x24: [io 0x18c0-0x18cf]
0.547396] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
0.547422] pci 0000:00:1f.3: reg 0x10: [mem 0x00000000-0x000000ff 64bit]
0.547451] pci 0000:00:1f.3: reg 0x20: [io 0x1c00-0x1c1f]
0.547592] pci 0000:00:1f.5: [8086:292d] type 00 class 0x010185
0.547617] pci 0000:00:1f.5: reg 0x10: [io 0x1c48-0x1c4f]
0.547628] pci 0000:00:1f.5: reg 0x14: [io 0x18fc-0x18ff]
0.547639] pci 0000:00:1f.5: reg 0x18: [io 0x1c40-0x1c47]
0.547649] pci 0000:00:1f.5: reg 0x1c: [io 0x18f8-0x18fb]
0.547660] pci 0000:00:1f.5: reg 0x20: [io 0x1c30-0x1c3f]
0.547671] pci 0000:00:1f.5: reg 0x24: [io 0x1c20-0x1c2f]
0.547917] pci 0000:01:00.0: [10de:06e9] type 00 class 0x030000
0.547946] pci 0000:01:00.0: reg 0x10: [mem 0xf2000000-0xf2ffffff]
0.547962] pci 0000:01:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
0.547977] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit]
0.547988] pci 0000:01:00.0: reg 0x24: [io 0x2000-0x207f]
0.547999] pci 0000:01:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
0.548010] pci 0000:01:00.0: enabling Extended Tags
0.548118] pci 0000:01:00.0: 32.000 Gb/s available PCIe bandwidth, limited by 2.5 GT/s
link at 0000:00:01.0 (capable of 64.000 Gb/s with 5 GT/s x16 link)
0.548216] pci 0000:00:01.0: PCI bridge to [bus 01]
0.548219] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
0.548222] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
0.548226] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.548297] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
0.548302] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
0.548306] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
0.548313] pci 0000:00:1c.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
0.548403] pci 0000:08:00.0: [10ec:8168] type 00 class 0x020000
0.548441] pci 0000:08:00.0: reg 0x10: [io 0x4000-0x40ff]
0.548477] pci 0000:08:00.0: reg 0x18: [mem 0xfe004000-0xfe004fff 64bit pref]
0.548500] pci 0000:08:00.0: reg 0x20: [mem 0xfe000000-0xfe003fff 64bit pref]
0.548516] pci 0000:08:00.0: reg 0x30: [mem 0x00000000-0x0001ffff pref]
0.548628] pci 0000:08:00.0: supports D1 D2
0.548630] pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
0.548791] pci 0000:00:1c.1: PCI bridge to [bus 08]
0.548795] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
0.548805] pci 0000:00:1c.1: bridge window [mem 0xfe000000-0xfe0fffff 64bit pref]
0.549122] pci 0000:0e:00.0: [14e4:4315] type 00 class 0x028000[ 0.549234] pci 0000:0e:00.0: reg 0x10: [mem 0xf6000000-0xf6003fff 64bit]
[ 0.549423] pci 0000:0e:00.0: enabling Extended Tags
[ 0.549672] pci 0000:0e:00.0: supports D1 D2
[ 0.549674] pci 0000:0e:00.0: PME# supported from D0 D3hot D3cold
[ 0.550183] pci 0000:00:1c.2: PCI bridge to [bus 0e-0f]
[ 0.550188] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
[ 0.550192] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff]
[ 0.550199] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
[ 0.550270] pci 0000:00:1c.3: PCI bridge to [bus 14-15]
[ 0.550274] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
[ 0.550279] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
[ 0.550286] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xcfffffff 64bit pref]
[ 0.550412] pci 0000:1a:00.0: [1217:10f7] type 00 class 0x0c0010
[ 0.550497] pci 0000:1a:00.0: reg 0x10: [mem 0xf3000000-0xf3000fff]
[ 0.550536] pci 0000:1a:00.0: reg 0x14: [mem 0xf3002000-0xf30027ff]
[ 0.550898] pci 0000:1a:00.0: supports D1 D2
[ 0.550900] pci 0000:1a:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.551115] pci 0000:1a:00.1: [1217:8120] type 00 class 0x080500
[ 0.551200] pci 0000:1a:00.1: reg 0x10: [mem 0xf3003800-0xf30038ff]
[ 0.551599] pci 0000:1a:00.1: supports D1 D2
[ 0.551601] pci 0000:1a:00.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.551793] pci 0000:1a:00.2: [1217:8130] type 00 class 0x018000
[ 0.551878] pci 0000:1a:00.2: reg 0x10: [mem 0xf3001000-0xf3001fff]
[ 0.551917] pci 0000:1a:00.2: reg 0x14: [mem 0xf3003000-0xf30037ff]
[ 0.551955] pci 0000:1a:00.2: reg 0x18: [mem 0xf3002800-0xf3002fff]
[ 0.552278] pci 0000:1a:00.2: supports D1 D2
[ 0.552280] pci 0000:1a:00.2: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.552597] pci 0000:00:1c.4: PCI bridge to [bus 1a]
[ 0.552604] pci 0000:00:1c.4: bridge window [mem 0xf3000000-0xf30fffff]
[ 0.552682] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.552717] pci_bus 0000:26: extended config space not accessible
[ 0.552792] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.552805] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7 window] (subtractive
decode)
[ 0.552807] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff window] (subtractive
decode)
[ 0.552809] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window]
(subtractive decode)
[ 0.552810] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff window]
(subtractive decode)
[ 0.552812] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff window]
(subtractive decode)[ 0.552814] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff window]
(subtractive decode)
[ 0.552816] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff window]
(subtractive decode)
[ 0.653414] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.653508] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.653600] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.653692] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.653783] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.653876] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.653967] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.654059] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.654139] ACPI: EC: interrupt unblocked
[ 0.654139] ACPI: EC: event unblocked
[ 0.654139] ACPI: \_SB_.PCI0.LPCB.EC0_: GPE=0x1c, EC_CMD/EC_SC=0x66, EC_DATA=0x62
[ 0.654139] ACPI: \_SB_.PCI0.LPCB.EC0_: Used as boot DSDT EC to handle transactions and
events
[ 0.654144] pci 0000:01:00.0: vgaarb: setting as boot VGA device
[ 0.654144] pci 0000:01:00.0: vgaarb: VGA device added:
decodes=io+mem,owns=io+mem,locks=none
[ 0.654144] pci 0000:01:00.0: vgaarb: bridge control possible
[ 0.654144] vgaarb: loaded
[ 0.654144] ACPI: bus type USB registered
[ 0.654144] usbcore: registered new interface driver usbfs
[ 0.654144] usbcore: registered new interface driver hub
[ 0.654144] usbcore: registered new device driver usb
[ 0.654144] pps_core: LinuxPPS API ver. 1 registered
[ 0.654144] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
<[email protected]>
[ 0.654144] PTP clock support registered
[ 0.654144] EDAC MC: Ver: 3.0.0
[ 0.654144] PCI: Using ACPI for IRQ routing
[ 0.662695] PCI: pci_cache_line_size set to 64 bytes
[ 0.663207] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.663208] e820: reserve RAM buffer [mem 0xbf8a1000-0xbfffffff]
[ 0.663210] e820: reserve RAM buffer [mem 0xbf9cd000-0xbfffffff]
[ 0.663212] e820: reserve RAM buffer [mem 0xbfb09000-0xbfffffff]
[ 0.663214] e820: reserve RAM buffer [mem 0xbfd18000-0xbfffffff]
[ 0.663215] e820: reserve RAM buffer [mem 0xbfd64000-0xbfffffff]
[ 0.663217] e820: reserve RAM buffer [mem 0xbfde6000-0xbfffffff]
[ 0.663218] e820: reserve RAM buffer [mem 0xbfe00000-0xbfffffff]
[ 0.663344] NetLabel: Initializing[ 0.663345] NetLabel: domain hash size = 128
[ 0.663346] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
[ 0.663369] NetLabel: unlabeled traffic allowed by default
[ 0.663374] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.663374] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.663374] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.667297] clocksource: Switched to clocksource tsc-early
[ 0.684512] VFS: Disk quotas dquot_6.6.0
[ 0.684537] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.684633] pnp: PnP ACPI init
[ 0.783883] system 00:00: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.783892] system 00:00: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.783976] system 00:01: [io 0x0480-0x048f] has been reserved
[ 0.783979] system 00:01: [io 0xffff] has been reserved
[ 0.783982] system 00:01: [io 0xffff] has been reserved
[ 0.783984] system 00:01: [io 0x0400-0x047f] has been reserved
[ 0.783986] system 00:01: [io 0x1180-0x11ff] has been reserved
[ 0.783988] system 00:01: [io 0xfe00] has been reserved
[ 0.783991] system 00:01: [io 0xff2c-0xff7f] has been reserved
[ 0.783997] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.784039] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.784072] pnp 00:03: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.784105] pnp 00:04: Plug and Play ACPI device, IDs DLL02bc PNP0f13 (active)
[ 0.784243] pnp 00:05: disabling [mem 0xf3003900-0xf3003bff] because it overlaps
0000:00:1c.4 BAR 14 [mem 0xf3000000-0xf30fffff]
[ 0.784288] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.784468] system 00:06: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.784470] system 00:06: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.784473] system 00:06: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.784475] system 00:06: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.784477] system 00:06: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.784479] system 00:06: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.784481] system 00:06: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.784483] system 00:06: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.784489] system 00:06: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.784718] pnp: PnP ACPI: found 7 devices
[ 0.791207] clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns:
2085701024 ns
[ 0.791239] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x001fffff] to [bus 08]
add_size 300000 add_align 100000
[ 0.791268] pci 0000:00:1c.4: bridge window [io 0x1000-0x0fff] to [bus 1a] add_size 1000
[ 0.791271] pci 0000:00:1c.4: bridge window [mem 0x00100000-0x000fffff 64bit pref] to[bus[[[bus[add_size[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[1a] add_size 200000 add_align 100000
0.791282] pci 0000:00:1c.5: bridge window [io 0x1000-0x0fff] to [bus 20] add_size 1000
0.791284] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff 64bit pref] to
20] add_size 200000 add_align 100000
0.791287] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x000fffff] to [bus 20]
200000 add_align 100000
0.791305] pci 0000:00:1c.1: BAR 14: assigned [mem 0xc0000000-0xc03fffff]
0.791310] pci 0000:00:1c.4: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
0.791313] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc07fffff]
0.791318] pci 0000:00:1c.5: BAR 15: assigned [mem 0xc0800000-0xc09fffff 64bit pref]
0.791321] pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
0.791324] pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
0.791329] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0a00000-0xc0a000ff 64bit]
0.791342] pci 0000:01:00.0: BAR 6: no space for [mem size 0x00020000 pref]
0.791345] pci 0000:01:00.0: BAR 6: failed to assign [mem size 0x00020000 pref]
0.791347] pci 0000:00:01.0: PCI bridge to [bus 01]
0.791349] pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
0.791353] pci 0000:00:01.0: bridge window [mem 0xf0000000-0xf2ffffff]
0.791355] pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
0.791359] pci 0000:00:1c.0: PCI bridge to [bus 02-03]
0.791362] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
0.791368] pci 0000:00:1c.0: bridge window [mem 0xf4000000-0xf5ffffff]
0.791372] pci 0000:00:1c.0: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
0.791380] pci 0000:08:00.0: BAR 6: assigned [mem 0xc0000000-0xc001ffff pref]
0.791381] pci 0000:00:1c.1: PCI bridge to [bus 08]
0.791384] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
0.791390] pci 0000:00:1c.1: bridge window [mem 0xc0000000-0xc03fffff]
0.791394] pci 0000:00:1c.1: bridge window [mem 0xfe000000-0xfe0fffff 64bit pref]
0.791401] pci 0000:00:1c.2: PCI bridge to [bus 0e-0f]
0.791404] pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
0.791409] pci 0000:00:1c.2: bridge window [mem 0xf6000000-0xf7ffffff]
0.791414] pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
0.791421] pci 0000:00:1c.3: PCI bridge to [bus 14-15]
0.791424] pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
0.791429] pci 0000:00:1c.3: bridge window [mem 0xf8000000-0xf9ffffff]
0.791434] pci 0000:00:1c.3: bridge window [mem 0xce000000-0xcfffffff 64bit pref]
0.791441] pci 0000:00:1c.4: PCI bridge to [bus 1a]
0.791444] pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
0.791449] pci 0000:00:1c.4: bridge window [mem 0xf3000000-0xf30fffff]
0.791454] pci 0000:00:1c.4: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
0.791460] pci 0000:00:1c.5: PCI bridge to [bus 20]
0.791463] pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff][[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[[0.791469] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc07fffff]
0.791473] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref]
0.791480] pci 0000:00:1e.0: PCI bridge to [bus 26]
0.791494] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7 window]
0.791496] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff window]
0.791498] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff window]
0.791500] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff window]
0.791502] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff window]
0.791503] pci_bus 0000:00: resource 9 [mem 0xc0000000-0xdfffffff window]
0.791505] pci_bus 0000:00: resource 10 [mem 0xf0000000-0xfebfffff window]
0.791507] pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
0.791509] pci_bus 0000:01: resource 1 [mem 0xf0000000-0xf2ffffff]
0.791511] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
0.791513] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
0.791514] pci_bus 0000:02: resource 1 [mem 0xf4000000-0xf5ffffff]
0.791516] pci_bus 0000:02: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
0.791518] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
0.791520] pci_bus 0000:08: resource 1 [mem 0xc0000000-0xc03fffff]
0.791521] pci_bus 0000:08: resource 2 [mem 0xfe000000-0xfe0fffff 64bit pref]
0.791523] pci_bus 0000:0e: resource 0 [io 0x5000-0x5fff]
0.791525] pci_bus 0000:0e: resource 1 [mem 0xf6000000-0xf7ffffff]
0.791527] pci_bus 0000:0e: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
0.791528] pci_bus 0000:14: resource 0 [io 0x6000-0x6fff]
0.791530] pci_bus 0000:14: resource 1 [mem 0xf8000000-0xf9ffffff]
0.791532] pci_bus 0000:14: resource 2 [mem 0xce000000-0xcfffffff 64bit pref]
0.791534] pci_bus 0000:1a: resource 0 [io 0x7000-0x7fff]
0.791535] pci_bus 0000:1a: resource 1 [mem 0xf3000000-0xf30fffff]
0.791537] pci_bus 0000:1a: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
0.791539] pci_bus 0000:20: resource 0 [io 0x8000-0x8fff]
0.791541] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc07fffff]
0.791542] pci_bus 0000:20: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref]
0.791544] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7 window]
0.791546] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff window]
0.791548] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff window]
0.791549] pci_bus 0000:26: resource 7 [mem 0x000d0000-0x000d3fff window]
0.791551] pci_bus 0000:26: resource 8 [mem 0x000d4000-0x000d7fff window]
0.791553] pci_bus 0000:26: resource 9 [mem 0xc0000000-0xdfffffff window]
0.791555] pci_bus 0000:26: resource 10 [mem 0xf0000000-0xfebfffff window]
0.791673] NET: Registered protocol family 2
0.791878] tcp_listen_portaddr_hash hash table entries: 2048 (order: 3, 32768 bytes)
0.791908] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
0.792022] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)[ 0.792188] TCP: Hash tables configured (established 32768 bind 32768)
[ 0.792242] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.792268] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.792334] NET: Registered protocol family 1
[ 0.792341] NET: Registered protocol family 44
[ 0.793728] pci 0000:01:00.0: Video device with shadowed ROM at [mem
0x000c0000-0x000dffff]
[ 0.793956] PCI: CLS 64 bytes, default 64
[ 0.794009] Unpacking initramfs...
[ 0.943184] Freeing initrd memory: 8676K
[ 0.943190] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.943192] software IO TLB: mapped [mem 0xbb8a1000-0xbf8a1000] (64MB)
[ 0.943443] check: Scanning for low memory corruption every 60 seconds
[ 0.944253] Initialise system trusted keyrings
[ 0.944267] Key type blacklist registered
[ 0.944349] workingset: timestamp_bits=41 max_order=20 bucket_order=0
[ 0.946423] zbud: loaded
[ 1.003291] Key type asymmetric registered
[ 1.003293] Asymmetric key parser 'x509' registered
[ 1.003313] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 244)
[ 1.003360] io scheduler mq-deadline registered
[ 1.003362] io scheduler kyber registered
[ 1.003438] io scheduler bfq registered
[ 1.004671] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 1.004772] intel_idle: does not run on family 6 model 23
[ 1.004861] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input
input0
[ 1.010387] ACPI: Lid Switch [LID0]
[ 1.010439] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00
input/input1
[ 1.010449] ACPI: Power Button [PWRB]
[ 1.010493] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00
input/input2
[ 1.010500] ACPI: Sleep Button [SLPB]
[ 1.010546] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.017035] ACPI: Power Button [PWRF]
[ 1.017151] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
[ 1.034464] acpi device:03: registered as cooling_device0
[ 1.034529] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device
00/LNXVIDEO:00/input/input4
[ 1.034923] Monitor-Mwait will be used to enter C-1 state
[ 1.038900] Monitor-Mwait will be used to enter C-2 state[ 1.038907] Monitor-Mwait will be used to enter C-3 state
[ 1.038912] tsc: Marking TSC unstable due to TSC halts in idle
[ 1.039189] clocksource: Switched to clocksource hpet
[ 1.039566] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.040861] usbcore: registered new interface driver usbserial_generic
[ 1.040868] usbserial: USB Serial support registered for generic
[ 1.040895] rtc_cmos 00:02: RTC can wake from S4
[ 1.041088] rtc_cmos 00:02: registered as rtc0
[ 1.041111] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.041207] ledtrig-cpu: registered to indicate activity on CPUs
[ 1.041507] NET: Registered protocol family 10
[ 1.050634] Segment Routing with IPv6
[ 1.050664] NET: Registered protocol family 17
[ 1.050906] RAS: Correctable Errors collector initialized.
[ 1.050961] microcode: sig=0x1067a, pf=0x80, revision=0xa07
[ 1.051043] microcode: Microcode Update Driver: v2.2.
[ 1.051308] registered taskstats version 1
[ 1.051326] Loading compiled-in X.509 certificates
[ 1.056700] Loaded X.509 cert 'Build time autogenerated kernel key:
89546a39deaf547f25e84b2ed55afaec0c8c176e'
[ 1.056729] zswap: loaded using pool lzo/zbud
[ 1.065080] Key type big_key registered
[ 1.065584] Magic number: 15:170:542
[ 1.065722] rtc_cmos 00:02: setting system clock to 2019-04-12T17:32:19 UTC
(1555090339)
[ 1.065857] Unstable clock detected, switching default tracing clock to "global"
If you want to keep using the local clock, then add:
"trace_clock=local"
on the kernel command line
[ 1.067636] Freeing unused decrypted memory: 2040K
[ 1.068264] Freeing unused kernel image memory: 1536K
[ 1.073082] Write protecting the kernel read-only data: 18432k
[ 1.074248] Freeing unused kernel image memory: 2016K
[ 1.074509] Freeing unused kernel image memory: 376K
[ 1.088003] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.088039] x86/mm: Checking user space page tables
[ 1.101553] x86/mm: Checked W+X mappings: passed, no W+X pages found.
[ 1.101557] Run /init as init process
[ 1.208305] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq
1,12
[ 1.219097] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.220461] ehci-pci: EHCI PCI platform driver[ 1.220654] ehci-pci 0000:00:1a.7: EHCI Host Controller
[ 1.220663] ehci-pci 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.220677] ehci-pci 0000:00:1a.7: debug port 1
[ 1.224596] ehci-pci 0000:00:1a.7: cache line size of 64 is not supported
[ 1.224615] ehci-pci 0000:00:1a.7: irq 19, io mem 0xf3304000
[ 1.236339] ehci-pci 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.236403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.00
[ 1.236405] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.236407] usb usb1: Product: EHCI Host Controller
[ 1.236409] usb usb1: Manufacturer: Linux 5.0.7-arch1-1-ARCH ehci_hcd
[ 1.236411] usb usb1: SerialNumber: 0000:00:1a.7
[ 1.238207] hub 1-0:1.0: USB hub found
[ 1.238216] hub 1-0:1.0: 6 ports detected
[ 1.247894] sdhci: Secure Digital Host Controller Interface driver
[ 1.247896] sdhci: Copyright(c) Pierre Ossman
[ 1.248380] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 1.248391] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.248611] ehci-pci 0000:00:1d.7: debug port 1
[ 1.252535] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 1.252554] ehci-pci 0000:00:1d.7: irq 23, io mem 0xf3304400
[ 1.252648] SCSI subsystem initialized
[ 1.262971] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.263073] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002,
bcdDevice= 5.00
[ 1.263076] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.263078] usb usb2: Product: EHCI Host Controller
[ 1.263080] usb usb2: Manufacturer: Linux 5.0.7-arch1-1-ARCH ehci_hcd
[ 1.263081] usb usb2: SerialNumber: 0000:00:1d.7
[ 1.263403] hub 2-0:1.0: USB hub found
[ 1.263413] hub 2-0:1.0: 6 ports detected
[ 1.263941] sdhci-pci 0000:1a:00.1: SDHCI controller found [1217:8120] (rev 1)
[ 1.264110] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim
to support it.
[ 1.264161] mmc0 bounce up to 128 segments into one, max segment size 65536 bytes
[ 1.264169] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim
to support it.
[ 1.266533] mmc0: SDHCI controller on PCI [0000:1a:00.1] using DMA
[ 1.266551] sdhci-pci 0000:1a:00.1: Will use DMA mode even though HW doesn't fully claim
to support it.
[ 1.277544] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.277706] uhci_hcd 0000:00:1a.0: UHCI Host Controller[ 1.277715] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.277724] uhci_hcd 0000:00:1a.0: detected 2 ports
[ 1.277749] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
[ 1.277971] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.00
[ 1.277973] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.277975] usb usb3: Product: UHCI Host Controller
[ 1.277977] usb usb3: Manufacturer: Linux 5.0.7-arch1-1-ARCH uhci_hcd
[ 1.277979] usb usb3: SerialNumber: 0000:00:1a.0
[ 1.280846] hub 3-0:1.0: USB hub found
[ 1.280855] hub 3-0:1.0: 2 ports detected
[ 1.281256] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.281264] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.281271] uhci_hcd 0000:00:1a.1: detected 2 ports
[ 1.281390] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
[ 1.281452] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.00
[ 1.281454] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.281456] usb usb4: Product: UHCI Host Controller
[ 1.281458] usb usb4: Manufacturer: Linux 5.0.7-arch1-1-ARCH uhci_hcd
[ 1.281460] usb usb4: SerialNumber: 0000:00:1a.1
[ 1.282381] hub 4-0:1.0: USB hub found
[ 1.282391] hub 4-0:1.0: 2 ports detected
[ 1.283129] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.283135] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.283147] uhci_hcd 0000:00:1a.2: detected 2 ports
[ 1.283170] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001840
[ 1.283356] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.00
[ 1.283358] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.283360] usb usb5: Product: UHCI Host Controller
[ 1.283362] usb usb5: Manufacturer: Linux 5.0.7-arch1-1-ARCH uhci_hcd
[ 1.283363] usb usb5: SerialNumber: 0000:00:1a.2
[ 1.284008] hub 5-0:1.0: USB hub found
[ 1.284018] hub 5-0:1.0: 2 ports detected
[ 1.284371] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.284376] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.284384] uhci_hcd 0000:00:1d.0: detected 2 ports
[ 1.284407] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001860
[ 1.284585] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.00
[ 1.284588] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1[ 1.284589] usb usb6: Product: UHCI Host Controller
[ 1.284591] usb usb6: Manufacturer: Linux 5.0.7-arch1-1-ARCH uhci_hcd
[ 1.284593] usb usb6: SerialNumber: 0000:00:1d.0
[ 1.285279] hub 6-0:1.0: USB hub found
[ 1.285289] hub 6-0:1.0: 2 ports detected
[ 1.285557] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.285562] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.285569] uhci_hcd 0000:00:1d.1: detected 2 ports
[ 1.285591] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001880
[ 1.285650] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.00
[ 1.285653] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.285654] usb usb7: Product: UHCI Host Controller
[ 1.285656] usb usb7: Manufacturer: Linux 5.0.7-arch1-1-ARCH uhci_hcd
[ 1.285658] usb usb7: SerialNumber: 0000:00:1d.1
[ 1.286351] hub 7-0:1.0: USB hub found
[ 1.286360] hub 7-0:1.0: 2 ports detected
[ 1.286617] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.286623] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.286630] uhci_hcd 0000:00:1d.2: detected 2 ports
[ 1.286672] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018a0
[ 1.286732] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001,
bcdDevice= 5.00
[ 1.286734] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.286736] usb usb8: Product: UHCI Host Controller
[ 1.286738] usb usb8: Manufacturer: Linux 5.0.7-arch1-1-ARCH uhci_hcd
[ 1.286739] usb usb8: SerialNumber: 0000:00:1d.2
[ 1.287001] hub 8-0:1.0: USB hub found
[ 1.287009] hub 8-0:1.0: 2 ports detected
[ 1.299574] libata version 3.00 loaded.
[ 1.314585] firewire_ohci 0000:1a:00.0: added OHCI v1.10 device as card 0, 8 IR + 8 IT
contexts, quirks 0x10
[ 1.316580] ata_piix 0000:00:1f.2: version 2.13
[ 1.316702] ata_piix 0000:00:1f.2: MAP [ P0 -- P1 -- ]
[ 1.318419] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.318484] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.350498] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input
input5
[ 1.476850] scsi host0: ata_piix
[ 1.477286] scsi host1: ata_piix
[ 1.477348] ata1: SATA max UDMA/133 cmd 0x18f0 ctl 0x18e4 bmdma 0x18d0 irq 19
[ 1.477352] ata2: SATA max UDMA/133 cmd 0x18e8 ctl 0x18e0 bmdma 0x18d8 irq 19[ 1.477501] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ]
[ 1.481218] scsi host2: ata_piix
[ 1.484849] scsi host3: ata_piix
[ 1.484939] ata3: SATA max UDMA/133 cmd 0x1c48 ctl 0x18fc bmdma 0x1c30 irq 19
[ 1.484944] ata4: SATA max UDMA/133 cmd 0x1c40 ctl 0x18f8 bmdma 0x1c38 irq 19
[ 1.599763] usb 2-2: new high-speed USB device number 2 using ehci-pci
[ 1.756352] random: fast init done
[ 1.809622] usb 2-2: New USB device found, idVendor=0c45, idProduct=63e0,
bcdDevice=84.23
[ 1.809624] usb 2-2: New USB device strings: Mfr=2, Product=1, SerialNumber=3
[ 1.809626] usb 2-2: Product: Integrated Webcam
[ 1.809628] usb 2-2: Manufacturer: SONiX Technology Inc
[ 1.809630] usb 2-2: SerialNumber: M09-001
[ 1.809738] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.814427] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.826018] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.836481] firewire_core 0000:1a:00.0: created device fw0: GUID 00000010a000b000, S400
[ 1.946432] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.948884] ata1.00: ATA-11: KINGSTON SUV400S37240G, 0C3G37R5, max UDMA/133
[ 1.948887] ata1.00: 468862128 sectors, multi 1: LBA48 NCQ (depth 0/32)
[ 1.951667] ata1.00: configured for UDMA/133
[ 1.951880] scsi 0:0:0:0: Direct-Access ATA KINGSTON SUV400S 37R5 PQ: 0 ANSI: 5
[ 1.960580] sd 0:0:0:0: [sda] 468862128 512-byte logical blocks: (240 GB/224 GiB)
[ 1.960583] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.960601] sd 0:0:0:0: [sda] Write Protect is off
[ 1.960604] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.960636] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support
DPO or FUA
[ 1.964235] sda: sda1 sda2 sda3
[ 1.965063] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.878725] REISERFS (device sda1): found reiserfs format "3.6" with standard journal
[ 2.878733] REISERFS (device sda1): using ordered data mode
[ 2.878735] reiserfs: using flush barriers
[ 2.879014] REISERFS (device sda1): journal params: device sda1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
[ 2.879466] REISERFS (device sda1): checking transaction log (sda1)
[ 2.882642] REISERFS (device sda1): Using r5 hash to sort names
[ 3.053417] systemd[1]: systemd 241.93-1-arch running in system mode. (+PAM +AUDIT 
SELINUX -IMA -APPARMOR +SMACK -SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS
+ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD +IDN2 -IDN +PCRE2 default
hierarchy=hybrid)
[ 3.069817] systemd[1]: Detected architecture x86-64.[ 3.074413] systemd[1]: Set hostname to <archlinux>.
[ 3.223234] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.224901] systemd[1]: Created slice system-systemd\x2dfsck.slice.
[ 3.224958] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.224974] systemd[1]: Reached target Login Prompts.
[ 3.224996] random: systemd: uninitialized urandom read (16 bytes read)
[ 3.225061] systemd[1]: Listening on initctl Compatibility Named Pipe.
[ 3.225636] systemd[1]: Listening on LVM2 poll daemon socket.
[ 3.225937] systemd[1]: Created slice system-getty.slice.
[ 3.225985] systemd[1]: Reached target Swap.
[ 3.226019] systemd[1]: Reached target Remote File Systems.
[ 3.856452] audit: type=1130 audit(1555090342.286:2): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-journald comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 3.869066] systemd-journald[251]: Received request to flush runtime journal from PID 1
[ 3.881030] systemd-journald[251]: File /var/log/journal
63d5ccb59c764ec3ac6da0288cbbcf78/system.journal corrupted or uncleanly shut down,
renaming and replacing.
[ 3.921090] audit: type=1130 audit(1555090342.353:3): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-udevd comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 3.990697] audit: type=1130 audit(1555090342.423:4): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-journal-flush comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 4.139601] ACPI Warning: SystemIO range 0x0000000000000428-0x000000000000042F
conflicts with OpRegion 0x0000000000000400-0x000000000000047F (\PMIO) (20181213
utaddress-213)
[ 4.139610] ACPI: If an ACPI driver is available for this device, you should use it instead of
the native driver
[ 4.140610] ACPI Warning: SystemIO range 0x00000000000011B0-0x00000000000011BF
conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20181213
utaddress-213)
[ 4.140617] ACPI: If an ACPI driver is available for this device, you should use it instead of
the native driver
[ 4.140618] ACPI Warning: SystemIO range 0x0000000000001180-0x00000000000011AF
conflicts with OpRegion 0x0000000000001180-0x00000000000011BB (\GPIO) (20181213
utaddress-213)
[ 4.140622] ACPI: If an ACPI driver is available for this device, you should use it instead of
the native driver
[ 4.140622] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 4.146445] ACPI: AC Adapter [ACAD] (on-line)
[ 4.151891] Linux agpgart interface v0.103[ 4.169035] i801_smbus 0000:00:1f.3: SMBus using PCI interrupt
[ 4.180230] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 4.317136] libphy: r8169: probed
[ 4.317750] r8169 0000:08:00.0 eth0: RTL8168d/8111d, 00:24:e8:de:00:6f, XID 281, IRQ 24
[ 4.317752] r8169 0000:08:00.0 eth0: jumbo features [frames: 9200 bytes, tx
checksumming: ko]
[ 4.323019] media: Linux media interface: v0.10
[ 4.342825] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.3)
[ 4.369891] ssb: Found chip with id 0x4312, rev 0x01 and package 0x00
[ 4.469080] videodev: Linux video capture interface: v2.00
[ 4.485647] audit: type=1130 audit(1555090342.913:5): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=lvm2-monitor comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 4.489972] r8169 0000:08:00.0 enp8s0: renamed from eth0
[ 4.503252] iTCO_vendor_support: vendor-support=0
[ 4.518705] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 4.518780] iTCO_wdt: Found a ICH9M TCO device (Version=2, TCOBASE=0x0460)
[ 4.519317] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 4.522924] b43-pci-bridge 0000:0e:00.0: Sonics Silicon Backplane found on PCI device
0000:0e:00.0
[ 4.594643] audit: type=1130 audit(1555090343.026:6): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 4.612316] battery: ACPI: Battery Slot [BAT1] (battery present)
[ 4.788896] uvcvideo: Found UVC 1.00 device Integrated Webcam (0c45:63e0)
[ 4.816658] uvcvideo 2-2:1.0: Entity type for entity Extension 5 was not initialized!
[ 4.816661] uvcvideo 2-2:1.0: Entity type for entity Extension 4 was not initialized!
[ 4.816663] uvcvideo 2-2:1.0: Entity type for entity Processing 3 was not initialized!
[ 4.816665] uvcvideo 2-2:1.0: Entity type for entity Camera 1 was not initialized!
[ 4.816828] input: Integrated Webcam: Integrated W as /devices/pci0000:00/0000:00:1d.7
usb2/2-2/2-2:1.0/input/input9
[ 4.826516] usbcore: registered new interface driver uvcvideo
[ 4.826517] USB Video Class driver (1.1.1)
[ 4.900162] EXT4-fs (sda2): mounting ext3 file system using the ext4 subsystem
[ 4.916887] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: stripe=4
[ 4.976995] intel_powerclamp: No package C-state available
[ 4.977263] snd_hda_codec_idt hdaudioC0D0: autoconfig for 92HD81B1C5: line_outs=1
(0xa/0x0/0x0/0x0/0x0) type:speaker
[ 4.977266] snd_hda_codec_idt hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 4.977268] snd_hda_codec_idt hdaudioC0D0: hp_outs=1 (0xb/0x0/0x0/0x0/0x0)
[ 4.977270] snd_hda_codec_idt hdaudioC0D0: mono: mono_out=0x0
[ 4.977271] snd_hda_codec_idt hdaudioC0D0: inputs:[ 4.977274] snd_hda_codec_idt hdaudioC0D0: Internal Mic=0x11
[ 4.977276] snd_hda_codec_idt hdaudioC0D0: Mic=0xc
[ 5.026664] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card0
input10
[ 5.027306] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 5.027380] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound
card0/input12
[ 5.033280] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 5.060021] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 5.061664] platform regulatory.0: Direct firmware load for regulatory.db failed with error
-2
[ 5.061667] cfg80211: failed to load regulatory.db
[ 5.198567] nvidia: loading out-of-tree module taints kernel.
[ 5.198579] nvidia: module license 'NVIDIA' taints kernel.
[ 5.198580] Disabling lock debugging due to kernel taint
[ 5.217419] nvidia: module verification failed: signature and/or required key missing -
tainting kernel
[ 5.234778] b43-phy0: Broadcom 4312 WLAN found (core revision 15)
[ 5.238392] nvidia 0000:01:00.0: vgaarb: changed VGA decodes:
olddecodes=io+mem,decodes=none:owns=io+mem
[ 5.240165] [drm] Initialized nvidia-drm 0.0.0 20150116 for 0000:01:00.0 on minor 0
[ 5.240179] NVRM: loading NVIDIA UNIX x86_64 Kernel Module 340.107 Thu May 24
21:54:01 PDT 2018
[ 5.271940] b43-phy0: Found PHY: Analog 6, Type 5 (LP), Revision 1
[ 5.271955] b43-phy0: Found Radio: Manuf 0x17F, ID 0x2062, Revision 2, Version 0
[ 5.276294] audit: type=1130 audit(1555090343.706:7): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected]:acpi_video0 comm="systemd"
exe="/usr/lib/systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.287926] audit: type=1130 audit(1555090343.719:8): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.289998] Broadcom 43xx driver loaded [ Features: PNLS ]
[ 5.305889] audit: type=1130 audit(1555090343.736:9): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-rfkill comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 5.310618] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 5.318988] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 5.354189] audit: type=1130 audit(1555090343.786:10): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-tmpfiles-setup comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.549652] kauditd_printk_skb: 4 callbacks suppressed
[ 5.549653] audit: type=1130 audit(1555090343.979:15): pid=1 uid=0 auid=4294967295ses=4294967295 msg='unit=ldconfig comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 5.559891] audit: type=1130 audit(1555090343.993:16): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-update-done comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 5.576413] audit: type=1130 audit(1555090344.009:17): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=dbus comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 5.862568] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input
input8
[ 5.868845] mousedev: PS/2 mouse device common for all mice
[ 5.925777] random: crng init done
[ 5.925779] random: 7 urandom warning(s) missed due to ratelimiting
[ 5.930718] audit: type=1130 audit(1555090344.359:18): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=wicd comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 5.939050] audit: type=1130 audit(1555090344.369:19): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-user-sessions comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 5.964585] NET: Registered protocol family 3
[ 6.219937] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 6.382604] audit: type=1130 audit(1555090344.813:20): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-logind comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 6.385053] audit: type=1130 audit(1555090344.816:21): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=sddm comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 6.990667] resource sanity check: requesting [mem 0x000c0000-0x000fffff], which spans
more than PCI Bus 0000:00 [mem 0x000d0000-0x000d3fff window]
[ 6.990844] caller _nv000788rm+0xe4/0x1c0 [nvidia] mapping multiple BARs
[ 7.963696] ------------[ cut here ]------------
[ 7.963701] Bad or missing usercopy whitelist? Kernel memory exposure attempt detected
from SLUB object 'nvidia_stack_t' (offset 11864, size 3)!
[ 7.963715] WARNING: CPU: 0 PID: 374 at mm/usercopy.c:83 usercopy_warn+0x7d/0xa0
[ 7.963716] Modules linked in: ax25 joydev mousedev arc4 b43 nvidia(POE) cordic bcma
mac80211 cfg80211 snd_hda_codec_idt snd_hda_codec_generic coretemp snd_hda_intel
kvm_intel ext4 snd_hda_codec crc32c_generic uvcvideo snd_hda_core crc16 mbcache
snd_hwdep videobuf2_vmalloc jbd2 videobuf2_memops videobuf2_v4l2 dell_laptop
rng_core fscrypto kvm ledtrig_audio videobuf2_common snd_pcm iTCO_wdt rfkill
dell_smbios iTCO_vendor_support drm videodev dell_wmi_descriptor wmi dcdbas ssb media
r8169 dell_smm_hwmon snd_timer psmouse pcmcia input_leds irqbypass snd intel_agp
pcmcia_core intel_gtt pcspkr realtek i2c_i801 libphy agpgart soundcore lpc_ich batterypcc_cpufreq ac evdev acpi_cpufreq mac_hid crypto_user ip_tables x_tables reiserfs sd_mod
ata_generic pata_acpi serio_raw atkbd libps2 ata_piix uhci_hcd libata sdhci_pci cqhci sdhci
scsi_mod firewire_ohci mmc_core firewire_core crc_itu_t ehci_pci ehci_hcd i8042 serio
[ 7.963765] CPU: 0 PID: 374 Comm: Xorg Tainted: P OE 5.0.7-arch1-1-ARCH #1
[ 7.963766] Hardware name: Dell Inc. Vostro 1520/0T808J, BIOS A04 09/10/2009
[ 7.963767] RIP: 0010:usercopy_warn+0x7d/0xa0
[ 7.963769] Code: 0b 8a 41 51 4d 89 d8 48 c7 c0 ec c2 0a 8a 49 89 f1 48 89 f9 48 0f 45 c2 48
c7 c7 a8 e0 0b 8a 4c 89 d2 48 89 c6 e8 3d f7 e0 ff <0f> 0b 48 83 c4 18 c3 48 c7 c6 68 aa 0a 8a
49 89 f1 49 89 f3 eb 96
[ 7.963771] RSP: 0018:ffffa92a80c8fbb8 EFLAGS: 00010286
[ 7.963772] RAX: 0000000000000000 RBX: ffff8d8579a7de58 RCX: 0000000000000000
[ 7.963774] RDX: 0000000000000007 RSI: ffffffff8a0aaa68 RDI: 00000000ffffffff
[ 7.963775] RBP: 0000000000000003 R08: 0000000000000001 R09: 000000000000035e
[ 7.963776] R10: 0000000000000001 R11: 0000000000000000 R12: 0000000000000001
[ 7.963777] R13: ffff8d8579a7de5b R14: ffff8d8579a7de58 R15: ffff8d8579a7dea0
[ 7.963779] FS: 00007fd41b0efdc0(0000) GS:ffff8d857ba00000(0000) knlGS
0000000000000000
[ 7.963780] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 7.963781] CR2: 0000558c6488aae0 CR3: 0000000136d70000 CR4: 00000000000406f0
[ 7.963782] Call Trace:
[ 7.963789] __check_object_size+0xc1/0x175
[ 7.963944] os_memcpy_to_user+0x21/0x40 [nvidia]
[ 7.964047] _nv001372rm+0xa5/0x260 [nvidia]
[ 7.964164] ? _nv004784rm+0x4eba/0x5500 [nvidia]
[ 7.964281] ? _nv004331rm+0xec/0xf0 [nvidia]
[ 7.964395] ? _nv004326rm+0xca/0x650 [nvidia]
[ 7.964492] ? _nv015126rm+0x576/0x5c0 [nvidia]
[ 7.964592] ? _nv000694rm+0x2e/0x60 [nvidia]
[ 7.964679] ? _nv000789rm+0x5f5/0x8b0 [nvidia]
[ 7.964683] ? _raw_spin_unlock_irqrestore+0x20/0x40
[ 7.964766] ? rm_ioctl+0x73/0x100 [nvidia]
[ 7.964850] ? nvidia_ioctl+0x14f/0x4a0 [nvidia]
[ 7.964854] ? generic_file_write_iter+0xe2/0x170
[ 7.964936] ? nvidia_frontend_ioctl+0x2d/0x50 [nvidia]
[ 7.965018] ? nvidia_frontend_unlocked_ioctl+0x19/0x20 [nvidia]
[ 7.965021] ? do_vfs_ioctl+0xa4/0x630
[ 7.965024] ? syscall_trace_enter+0x1d3/0x2d0
[ 7.965026] ? ksys_ioctl+0x60/0x90
[ 7.965028] ? __x64_sys_ioctl+0x16/0x20
[ 7.965029] ? do_syscall_64+0x5b/0x170
[ 7.965031] ? entry_SYSCALL_64_after_hwframe+0x44/0xa9
[ 7.965033] ---[ end trace 571fcf60f64b9194 ]---[ 9.988388] audit: type=1130 audit(1555090348.419:22): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 10.002455] audit: type=1006 audit(1555090348.433:23): pid=381 uid=0 old
auid=4294967295 auid=975 tty=(none) old-ses=4294967295 ses=1 res=1
[ 10.059701] audit: type=1130 audit(1555090348.489:24): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 11.216044] kauditd_printk_skb: 1 callbacks suppressed
[ 11.216046] audit: type=1130 audit(1555090349.646:26): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=polkit comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 11.268814] audit: type=1130 audit(1555090349.699:27): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=udisks2 comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 11.940538] audit: type=1130 audit(1555090350.373:28): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=upower comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 13.379061] RTL8211B Gigabit Ethernet r8169-800:00: attached PHY driver [RTL8211B
Gigabit Ethernet] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)
[ 13.528130] r8169 0000:08:00.0 enp8s0: Link is Down
[ 15.519598] audit: type=1006 audit(1555090353.949:29): pid=450 uid=0 old
auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=2 res=1
[ 15.561188] audit: type=1130 audit(1555090353.993:30): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 15.572216] audit: type=1006 audit(1555090354.003:31): pid=456 uid=0 old
auid=4294967295 auid=1000 tty=(none) old-ses=4294967295 ses=3 res=1
[ 15.633667] systemd-journald[251]: File /var/log/journal
63d5ccb59c764ec3ac6da0288cbbcf78/user-1000.journal corrupted or uncleanly shut down,
renaming and replacing.
[ 15.639710] audit: type=1130 audit(1555090354.069:32): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 15.697839] systemd-journald[251]: Failed to set ACL on /var/log/journal
63d5ccb59c764ec3ac6da0288cbbcf78/user-1000.journal, ignoring: Operation not supported
[ 17.479876] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 24.659197] audit: type=1130 audit(1555090363.089:33): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=rtkit-daemon comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 24.725759] RTL8211B Gigabit Ethernet r8169-800:00: attached PHY driver [RTL8211B
Gigabit Ethernet] (mii_bus:phy_addr=r8169-800:00, irq=IGNORE)[ 24.877897] r8169 0000:08:00.0 enp8s0: Link is Down
[ 25.146677] b43-phy0: Loading firmware version 666.2 (2011-02-23 01:15:07)
[ 26.085814] audit: type=1131 audit(1555090364.516:34): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib/systemd/systemd"
hostname=? addr=? terminal=? res=success'
[ 26.105557] audit: type=1131 audit(1555090364.536:35): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='[email protected] comm="systemd" exe="/usr/lib/systemd
systemd" hostname=? addr=? terminal=? res=success'
[ 35.857110] wlan0: authenticate with 48:f8:b3:09:29:0b
[ 35.874042] wlan0: send auth to 48:f8:b3:09:29:0b (try 1/3)
[ 35.876203] wlan0: authenticated
[ 35.876406] wlan0: associate with 48:f8:b3:09:29:0b (try 1/3)
[ 35.879732] wlan0: RX AssocResp from 48:f8:b3:09:29:0b (capab=0x411 status=0 aid=4)
[ 35.880158] wlan0: associated
[ 35.919002] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 36.556116] 8021q: 802.1Q VLAN Support v1.8
[ 910.599369] audit: type=1130 audit(1555091249.028:36): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'
[ 910.599374] audit: type=1131 audit(1555091249.028:37): pid=1 uid=0 auid=4294967295
ses=4294967295 msg='unit=systemd-tmpfiles-clean comm="systemd" exe="/usr/lib
systemd/systemd" hostname=? addr=? terminal=? res=success'

Última edição por willianholtz (16/04/2019 12:35:13)


Vostro 1520 = CPU:Core 2 Duo P8600 2.4GHz 3MB | GPU:NVidia GeForce 9300M GS de 512MB | HD: 360GB | RAM:4GB | Arch-Linux

Offline

#2 13/04/2019 15:30:45

swatquest
Moderador
Registrado: 05/10/2010
Mensagens: 1.915

Re: Sistema dando erro coom tela preta (Resolvido)

Aconteceu com duas funcionalidades diferentes. Áudio e vídeo.
pode ser até configuração.
Faça um teste instalando o kernel lts. E veja se o problema continua.
Outra opção, quando acontecer veja o erro no journalctl.

jornalctl -n 50

Offline

#3 13/04/2019 15:45:32

willianholtz
Membro
De: Três Barras - SC
Registrado: 23/08/2009
Mensagens: 382

Re: Sistema dando erro coom tela preta (Resolvido)

swatquest escreveu:

Aconteceu com duas funcionalidades diferentes. Áudio e vídeo.
pode ser até configuração.
Faça um teste instalando o kernel lts. E veja se o problema continua.
Outra opção, quando acontecer veja o erro no journalctl.

jornalctl -n 50

Então, fiz este teste já, agora instalei o kernel CK, me parece que ficou estável.. Vamos dar um tempo. qualquer coisa posto aqui novamente. De qualquer forma, está ai...

-- Logs begin at Wed 2019-04-10 17:56:56 UTC, end at Sat 2019-04-13 17:41:55 UTC. --
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "bind"
abr 13 17:41:23 archlinux kernel: usb 1-3: USB disconnect, device number 3
abr 13 17:41:23 archlinux kdeinit5[548]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux plasmashell[605]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux kdeinit5[548]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux plasmashell[605]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "unbind"
abr 13 17:41:24 archlinux kernel: usb 1-3: new high-speed USB device number 4 using ehci-pci
abr 13 17:41:24 archlinux kernel: usb 1-3: New USB device found, idVendor=0930, idProduct=6545, bcdDevice= 1.00
abr 13 17:41:24 archlinux kernel: usb 1-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
abr 13 17:41:24 archlinux kernel: usb 1-3: Product: DT 101 G2
abr 13 17:41:24 archlinux kernel: usb 1-3: Manufacturer: Kingston
abr 13 17:41:24 archlinux kernel: usb 1-3: SerialNumber: 00142225A589EB816515010C
abr 13 17:41:24 archlinux kernel: usb-storage 1-3:1.0: USB Mass Storage device detected
abr 13 17:41:24 archlinux kernel: scsi host5: usb-storage 1-3:1.0
abr 13 17:41:24 archlinux mtp-probe[13898]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3"
abr 13 17:41:24 archlinux mtp-probe[13898]: bus: 1, device: 4 was not an MTP device
abr 13 17:41:24 archlinux kdeinit5[548]: UdevQt: unhandled device action "bind"
abr 13 17:41:24 archlinux plasmashell[605]: UdevQt: unhandled device action "bind"
abr 13 17:41:24 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "bind"
abr 13 17:41:24 archlinux mtp-probe[13900]: checking bus 1, device 4: "/sys/devices/pci0000:00/0000:00:1a.7/usb1/1-3"
abr 13 17:41:24 archlinux mtp-probe[13900]: bus: 1, device: 4 was not an MTP device
abr 13 17:41:24 archlinux kdeinit5[548]: UdevQt: unhandled device action "bind"
abr 13 17:41:24 archlinux plasmashell[605]: UdevQt: unhandled device action "bind"
abr 13 17:41:24 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "bind"
abr 13 17:41:25 archlinux kernel: scsi 5:0:0:0: Direct-Access     Kingston DT 101 G2        PMAP PQ: 0 ANSI: 0 CCS
abr 13 17:41:26 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 18389, resource id: 54525953, major code: 142 (Unknown), minor code: 3
abr 13 17:41:26 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 18444, resource id: 67108870, major code: 142 (Unknown), minor code: 3
abr 13 17:41:26 archlinux kernel: sd 5:0:0:0: [sdb] 15240576 512-byte logical blocks: (7.80 GB/7.27 GiB)
abr 13 17:41:26 archlinux kernel: sd 5:0:0:0: [sdb] Write Protect is off
abr 13 17:41:26 archlinux kernel: sd 5:0:0:0: [sdb] Mode Sense: 23 00 00 00
abr 13 17:41:26 archlinux kernel: sd 5:0:0:0: [sdb] No Caching mode page found
abr 13 17:41:26 archlinux kernel: sd 5:0:0:0: [sdb] Assuming drive cache: write through
abr 13 17:41:26 archlinux kernel:  sdb: sdb1
abr 13 17:41:26 archlinux kernel: sd 5:0:0:0: [sdb] Attached SCSI removable disk
abr 13 17:41:27 archlinux kernel: FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.
abr 13 17:41:27 archlinux udisksd[408]: Mounted /dev/sdb1 at /run/media/willian/4520-4E67 on behalf of uid 1000
abr 13 17:41:27 archlinux plasmashell[605]: org.kde.plasmaquick: Applet "Notificação de dispositivos" loaded after 1 msec
abr 13 17:41:27 archlinux plasmashell[605]: org.kde.plasmaquick: Increasing score for "Notificação de dispositivos" to 40
abr 13 17:41:27 archlinux kwin_x11[600]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 39137, resource id: 71303168, major code: 18 (ChangeProperty), minor code: 0
abr 13 17:41:27 archlinux kwin_x11[600]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 39231, resource id: 71303169, major code: 18 (ChangeProperty), minor code: 0
abr 13 17:41:33 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 18881, resource id: 54525953, major code: 142 (Unknown), minor code: 3
abr 13 17:41:33 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 18940, resource id: 71303174, major code: 142 (Unknown), minor code: 3
abr 13 17:41:38 archlinux kdeinit5[13928]: kf5.kio.kio_file: "Couldn't preserve group for '/run/media/willian/4520-4E67/Armandinho/03. A Filha.mp3'"
abr 13 17:41:42 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 19472, resource id: 69206025, major code: 142 (Unknown), minor code: 3
abr 13 17:41:46 archlinux kdeinit5[13928]: kf5.kio.kio_file: "Couldn't preserve group for '/run/media/willian/4520-4E67/Armandinho/08. I can't Say.mp3'"
abr 13 17:41:54 archlinux kwin_x11[600]: qt.qpa.xcb: QXcbConnection: XCB error: 3 (BadWindow), sequence: 51328, resource id: 69208639, major code: 15 (QueryTree), minor code: 0
abr 13 17:41:55 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 20001, resource id: 71303174, major code: 142 (Unknown), minor code: 3
abr 13 17:41:55 archlinux plasmashell[605]: qt.qpa.xcb: QXcbConnection: XCB error: 2 (BadValue), sequence: 20073, resource id: 67108870, major code: 142 (Unknown), minor code: 3

Última edição por willianholtz (13/04/2019 15:47:38)


Vostro 1520 = CPU:Core 2 Duo P8600 2.4GHz 3MB | GPU:NVidia GeForce 9300M GS de 512MB | HD: 360GB | RAM:4GB | Arch-Linux

Offline

#4 13/04/2019 23:42:31

swatquest
Moderador
Registrado: 05/10/2010
Mensagens: 1.915

Re: Sistema dando erro coom tela preta (Resolvido)

erros

FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.


qt.qpa.xcb: QXcbConnection: XCB error: 3, contudo não é este problema..acho que pode ignorar este erro
veja
https://forum.manjaro.org/t/kde-plasma- … al/21790/9


abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "bind"
abr 13 17:41:23 archlinux kernel: usb 1-3: USB disconnect, device number 3
abr 13 17:41:23 archlinux kdeinit5[548]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux plasmashell[605]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux kdeinit5[548]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux plasmashell[605]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "unbind"
teria que ver o erro

pode ser o erro do fat

veja a saida do dmesg


veja se tem algo similar a
FAT-fs (sdc1): FAT read failed (blocknr 1)

Offline

#5 14/04/2019 16:02:27

willianholtz
Membro
De: Três Barras - SC
Registrado: 23/08/2009
Mensagens: 382

Re: Sistema dando erro coom tela preta (Resolvido)

swatquest escreveu:

erros

FAT-fs (sdb1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.


qt.qpa.xcb: QXcbConnection: XCB error: 3, contudo não é este problema..acho que pode ignorar este erro
veja
https://forum.manjaro.org/t/kde-plasma- … al/21790/9


abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "bind"
abr 13 17:41:23 archlinux kernel: usb 1-3: USB disconnect, device number 3
abr 13 17:41:23 archlinux kdeinit5[548]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux plasmashell[605]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux kdeinit5[548]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux plasmashell[605]: UdevQt: unhandled device action "unbind"
abr 13 17:41:23 archlinux org_kde_powerdevil[628]: UdevQt: unhandled device action "unbind"
teria que ver o erro

pode ser o erro do fat

veja a saida do dmesg


veja se tem algo similar a
FAT-fs (sdc1): FAT read failed (blocknr 1)

Nada. com falei tentei o kernel CK, mesmo problema, resolvi testar uma iso de outra distro, não sei se sendo live disc ele da o problema, mas pelo que testei não deu. Embora dei uma pesquisada no google, e achei algo referente na wiki do gentoo, onde falava mais ou menos assim "que o driver 340xx seria descontinuado por alguns problemas com o kernel 5". então hoje voltei para a versão lá de 2018 (tanto meu kernel quanto driver de video). Vou espera agora. Pois a principio tanto no dmesg quanto no journal, nada de "anormal", apenas erros bobos mesmo..

obs: esse problema começou cerca de 2 meses atras, após uma mundaça do meu drive não usar mais o xorg-server..


Vostro 1520 = CPU:Core 2 Duo P8600 2.4GHz 3MB | GPU:NVidia GeForce 9300M GS de 512MB | HD: 360GB | RAM:4GB | Arch-Linux

Offline

#6 14/04/2019 20:49:27

swatquest
Moderador
Registrado: 05/10/2010
Mensagens: 1.915

Re: Sistema dando erro coom tela preta (Resolvido)

o que é o /dev/sdb1?

Offline

#7 16/04/2019 00:27:41

slackbeck
Membro
Registrado: 05/09/2018
Mensagens: 61

Re: Sistema dando erro coom tela preta (Resolvido)

Eu ia comentar isso desde o princípio, parece que essa tela preta é o XORG, _não_ é kernel panic. No kernel panic, aparece uma tela preta com um monte de texto para debug... Ou seja, seu kernel estava rodando normalmente enquanto essa tela do XORG aí aparecia... Você tentou entrar em uma TTY com CTRL+ALT+F2 ?

Por que você desinstalou o xorg-server? Mesmo que estiver usando o Wayland, reinstale o xorg-server e suas dependências...

Mas vamos por partes... Parece que você tem mais de um problema!

Observe no seu dmesg:

[ 5.198567] nvidia: loading out-of-tree module taints kernel.
[ 5.198579] nvidia: module license 'NVIDIA' taints kernel.
[ 5.217419] nvidia: module verification failed: signature and/or required key missing -
tainting kernel

Isso indica um driver ruim, na minha super humilde opinião não técnica absolutamente...

Infelizmente, você colou poucas informações em ordem cronológica que eu gostaria de ter visto... A gente tem que fazer muitas interpretações aqui... O driver que você tinha usado com o Linux 5 era o nvidia-340xx do repo Extra quando saiu aquele dmesg?

Anyways,  esse tal de linux-ck, Não sei o que é e não parece ser coisa boa, só encontrei referência desses no AUR... Vamos combinar de _não_ se arriscar com kernels instáveis do AUR para tentar solucionar um problema grave , OK?! Cheers! rss

Você poderia mostrar onde viu essa notícia que o nvidia-340xx está sendo dropado ? Aqui nos repos oficiais parece que está tudo OK com ele... Pode usar  .. Pq não?

Vou propor algumas coisas.  Com a GeForce 9300M, instalar os seguintes pacotes:

core/linux    5.0.7.arch1-1
core/linux-headers 5.0.7.arch1-1
    Header files and scripts for building modules for Linux kernel

"e"

extra/nvidia-340xx 340.107-73
    NVIDIA drivers for linux, 340xx legacy branch
extra/nvidia-340xx-dkms 340.107-73
    NVIDIA driver sources for linux, 340xx legacy branch
extra/nvidia-340xx-settings 340.107-1
    Tool for configuring the NVIDIA graphics driver, 340xx legacy branch
extra/nvidia-340xx-utils 340.107-3
    NVIDIA drivers utilities

Estou propondo instalar os pacotes linux-headers somente para ter certeza que o kernel tem todos os pacotes que precisa.
O nvidia-dkms eu acredito que seja necessário somente se for tentar usar o driver para algumas aplicações como o VBox, se não quiser, não precisa instalar esse para fazer esse teste....
Eu instalaria por que o negócio é tentar consertar, e depois que estiver estável, você poderá tentar retirar o nvidia-dkms...


Segunda proposta, é seguir o conselho do amigo moderador,  tentar com o linux-lts e o seu driver da nvidia correspondente. Mas leia todo o post primeiro...

Observe atentamente que você deverá *remover* o seguinte pacote para _não_ dar problemas no seu reboot!

 
# pacman -R nvidia-340xx  

e depois instalar os seguintes:

core/linux-lts 4.19.34-1 
    The Linux-lts kernel and modules
core/linux-lts-headers 4.19.34-1 
    Header files and scripts for building modules for Linux-lts kerne

*e*

extra/nvidia-340xx-lts 340.107-20
    NVIDIA drivers for linux-lts

Nada de pacotes do AUR ..

Tenho uma pergunta,
Eu não sei como funciona um driver da nvidia antigo... Mas para rodar o VLC com o driver de vídeo, você deve explicitamente abrir o VLC com o nvidia?
Como você abre o VLC para usar o driver?
Eu não sei se você estava usando o driver do Nvidia?

Qual driver de vídeo você estava tentando usar?

Tem um driver misterioso chamado "nv" que não é muito bom. Nem fui atrás para ver melhor pq não vale a pena, mas se você tentou instalar ele deve saber.

"you seem to be using the "nv" driver?
That piece of obfuscated code has been dropped in favor of nouveau if you want to go the open source way. Nouveau is far from completed, but it can give you a working desktop smile"
https://bbs.archlinux.org/viewtopic.php?id=98421

Então mais uma alternativa, se o driver nvidia-340xx  não funcionar, que é um blob binário, você pode tentar desinstalar eles e instalar o driver open-source do  Nouveau e fazer o reboot com o linux normal, atual..
Cuidado, mexer com drivers de vídeo pode complicar e se der erro, você deverá entrar com um pendrive live e fazer chroot no seu sistema, desinstalar o Nouveau e instalar o do nvidia de novo com o pacman no chroot!

Que se não me engano é esse driver que vocẽ deveria olhar:

extra/xf86-video-nouveau 1.0.16-1 (xorg-drivers)
    Open Source 3D acceleration driver for nVidia cards

Observe que novamente você vai precisar do xorg-server e suas deps.

Tem tb o driver do Mesa, mas acho que não serve no seu caso específico, nem procure muito esse... Alguém poderia falar mais se o mesa serviria ou não..

Última edição por slackbeck (16/04/2019 00:38:57)

Offline

#8 16/04/2019 12:34:42

willianholtz
Membro
De: Três Barras - SC
Registrado: 23/08/2009
Mensagens: 382

Re: Sistema dando erro coom tela preta (Resolvido)

slackbeck escreveu:

Eu ia comentar isso desde o princípio, parece que essa tela preta é o XORG, _não_ é kernel panic. No kernel panic, aparece uma tela preta com um monte de texto para debug... Ou seja, seu kernel estava rodando normalmente enquanto essa tela do XORG aí aparecia... Você tentou entrar em uma TTY com CTRL+ALT+F2 ?

Por que você desinstalou o xorg-server? Mesmo que estiver usando o Wayland, reinstale o xorg-server e suas dependências...

Mas vamos por partes... Parece que você tem mais de um problema!

Observe no seu dmesg:

[ 5.198567] nvidia: loading out-of-tree module taints kernel.
[ 5.198579] nvidia: module license 'NVIDIA' taints kernel.
[ 5.217419] nvidia: module verification failed: signature and/or required key missing -
tainting kernel

Isso indica um driver ruim, na minha super humilde opinião não técnica absolutamente...

Infelizmente, você colou poucas informações em ordem cronológica que eu gostaria de ter visto... A gente tem que fazer muitas interpretações aqui... O driver que você tinha usado com o Linux 5 era o nvidia-340xx do repo Extra quando saiu aquele dmesg?

Anyways,  esse tal de linux-ck, Não sei o que é e não parece ser coisa boa, só encontrei referência desses no AUR... Vamos combinar de _não_ se arriscar com kernels instáveis do AUR para tentar solucionar um problema grave , OK?! Cheers! rss

Você poderia mostrar onde viu essa notícia que o nvidia-340xx está sendo dropado ? Aqui nos repos oficiais parece que está tudo OK com ele... Pode usar  .. Pq não?

Vou propor algumas coisas.  Com a GeForce 9300M, instalar os seguintes pacotes:

core/linux    5.0.7.arch1-1
core/linux-headers 5.0.7.arch1-1
    Header files and scripts for building modules for Linux kernel

"e"

extra/nvidia-340xx 340.107-73
    NVIDIA drivers for linux, 340xx legacy branch
extra/nvidia-340xx-dkms 340.107-73
    NVIDIA driver sources for linux, 340xx legacy branch
extra/nvidia-340xx-settings 340.107-1
    Tool for configuring the NVIDIA graphics driver, 340xx legacy branch
extra/nvidia-340xx-utils 340.107-3
    NVIDIA drivers utilities

Estou propondo instalar os pacotes linux-headers somente para ter certeza que o kernel tem todos os pacotes que precisa.
O nvidia-dkms eu acredito que seja necessário somente se for tentar usar o driver para algumas aplicações como o VBox, se não quiser, não precisa instalar esse para fazer esse teste....
Eu instalaria por que o negócio é tentar consertar, e depois que estiver estável, você poderá tentar retirar o nvidia-dkms...


Segunda proposta, é seguir o conselho do amigo moderador,  tentar com o linux-lts e o seu driver da nvidia correspondente. Mas leia todo o post primeiro...

Observe atentamente que você deverá *remover* o seguinte pacote para _não_ dar problemas no seu reboot!

 
# pacman -R nvidia-340xx  

e depois instalar os seguintes:

core/linux-lts 4.19.34-1 
    The Linux-lts kernel and modules
core/linux-lts-headers 4.19.34-1 
    Header files and scripts for building modules for Linux-lts kerne

*e*

extra/nvidia-340xx-lts 340.107-20
    NVIDIA drivers for linux-lts

Nada de pacotes do AUR ..

Tenho uma pergunta,
Eu não sei como funciona um driver da nvidia antigo... Mas para rodar o VLC com o driver de vídeo, você deve explicitamente abrir o VLC com o nvidia?
Como você abre o VLC para usar o driver?
Eu não sei se você estava usando o driver do Nvidia?

Qual driver de vídeo você estava tentando usar?

Tem um driver misterioso chamado "nv" que não é muito bom. Nem fui atrás para ver melhor pq não vale a pena, mas se você tentou instalar ele deve saber.

"you seem to be using the "nv" driver?
That piece of obfuscated code has been dropped in favor of nouveau if you want to go the open source way. Nouveau is far from completed, but it can give you a working desktop smile"
https://bbs.archlinux.org/viewtopic.php?id=98421

Então mais uma alternativa, se o driver nvidia-340xx  não funcionar, que é um blob binário, você pode tentar desinstalar eles e instalar o driver open-source do  Nouveau e fazer o reboot com o linux normal, atual..
Cuidado, mexer com drivers de vídeo pode complicar e se der erro, você deverá entrar com um pendrive live e fazer chroot no seu sistema, desinstalar o Nouveau e instalar o do nvidia de novo com o pacman no chroot!

Que se não me engano é esse driver que vocẽ deveria olhar:

extra/xf86-video-nouveau 1.0.16-1 (xorg-drivers)
    Open Source 3D acceleration driver for nVidia cards

Observe que novamente você vai precisar do xorg-server e suas deps.

Tem tb o driver do Mesa, mas acho que não serve no seu caso específico, nem procure muito esse... Alguém poderia falar mais se o mesa serviria ou não..

slackbeck, resolvi meu problema. Infelizmente tive que voltar para o kernel antigo, para utilizar o driver nvidia, issosem contar que tive de instalar o xorg-server. 100%. Porém tive que por na linha de ignore-update e ignore-upgrade do pacman os pacotes que voltei que no caso foram os seguintes: nvidia-340xx nvidia-340xx-utils linux xorg-server

Quem for utilizar a versão mais nova do kernel, aconselho usar o nouveau que funciona, mas lembrando, elimine todos os pacotes da nvidia do seu sistema, no meu caso não estava dando certo o driver da nouveau porque ficava muito lento. Ai fui obrigado a voltar o kernel e reinstalar o xorg-server.

Fica a dica pra quem tiver algum problema...


Vostro 1520 = CPU:Core 2 Duo P8600 2.4GHz 3MB | GPU:NVidia GeForce 9300M GS de 512MB | HD: 360GB | RAM:4GB | Arch-Linux

Offline

Rodapé do site