Você não está autenticado.

Anúncio

Arch Linux Brasil está precisando de sua colaboração para realizar o pagamento do domínio e do host, para colaborar, realizar doações via paypal.

Para mais informações: contato at archlinux-br.org.

#1 21/04/2021 03:06:43

shoomba
Membro
Registrado: 21/04/2021
Mensagens: 1

driver broadcom BCM43602 802.11ac não funciona

ola, eu acabei de instalar o arch linux no meu macbook pro 2015 15" porem ele teve problemas com detectar a placa de rede eu ja tive problemas com isso antes então eu olhei o modelo da placa de rede era uma placa broadcon então eu simplesmente instalei o drive broadcon dkms porem mesmo depois de reiniciar a maquina o driver não pegou estou usando uma placa de rede usb porem fica meio incomodo alem de sobrar só mais uma entrada usb

output lspci -v

03:00.0 Network controller: Broadcom Inc. and subsidiaries BCM43602 802.11ac Wireless LAN SoC (rev 01)
        Subsystem: Apple Inc. Device 0152
        Flags: bus master, fast devsel, latency 0, IRQ 18
        Memory at a0800000 (64-bit, non-prefetchable) [size=32K]
        Memory at a0400000 (64-bit, non-prefetchable) [size=4M]
        Capabilities: [48] Power Management version 3
        Capabilities: [58] MSI: Enable- Count=1/16 Maskable- 64bit+
        Capabilities: [68] Vendor Specific Information: Len=44 <?>
        Capabilities: [ac] Express Endpoint, MSI 00
        Capabilities: [100] Advanced Error Reporting
        Capabilities: [13c] Device Serial Number 02-6d-01-ff-ff-d8-c4-b3
        Capabilities: [150] Power Budgeting <?>
        Capabilities: [160] Virtual Channel
        Capabilities: [1b0] Latency Tolerance Reporting
        Capabilities: [220] Physical Resizable BAR
        Capabilities: [240] L1 PM Substates
        Kernel modules: brcmfmac, wl

output sudo pacman -S  broadcon-wl-dkms

warning: broadcom-wl-dkms-6.30.223.271-26 is up to date -- reinstalling
resolving dependencies...
looking for conflicting packages...

Packages (1) broadcom-wl-dkms-6.30.223.271-26

Total Installed Size:  7.60 MiB
Net Upgrade Size:      0.00 MiB

:: Proceed with installation? [Y/n] y
(1/1) checking keys in keyring                                                                                            [#########################################################################] 100%
(1/1) checking package integrity                                                                                          [#########################################################################] 100%
(1/1) loading package files                                                                                               [#########################################################################] 100%
(1/1) checking for file conflicts                                                                                         [#########################################################################] 100%
(1/1) checking available disk space                                                                                       [#########################################################################] 100%
:: Running pre-transaction hooks...
(1/1) Remove upgraded DKMS modules
==> dkms remove --no-depmod -m broadcom-wl -v 6.30.223.271 -k 5.11.15-arch1-2
:: Processing package changes...
(1/1) reinstalling broadcom-wl-dkms                                                                                       [#########################################################################] 100%

To load the new module, run the following commands as root:

  rmmod b43 b43legacy bcm43xx bcma brcm80211 brcmfmac brcmsmac ssb wl
  modprobe wl

Or just reboot the system.

:: Running post-transaction hooks...
(1/2) Arming ConditionNeedsUpdate...
(2/2) Install DKMS modules
==> dkms install --no-depmod -m broadcom-wl -v 6.30.223.271 -k 5.11.15-arch1-2
==> depmod 5.11.15-arch1-2

output rmmod b43 b43legacy bcm43xx bcma brcm80211 brcmfmac brcmsmac ssb wl ;modprobe wl

rmmod: ERROR: Module b43 is not currently loaded
rmmod: ERROR: Module b43legacy is not currently loaded
rmmod: ERROR: Module bcm43xx is not currently loaded
rmmod: ERROR: Module bcma is not currently loaded
rmmod: ERROR: Module brcm80211 is not currently loaded
rmmod: ERROR: Module brcmfmac is not currently loaded
rmmod: ERROR: Module brcmsmac is not currently loaded
rmmod: ERROR: Module ssb is not currently loaded
rmmod: ERROR: Module wl is not currently loaded

Última edição por shoomba (21/04/2021 03:28:25)

Offline

#2 03/06/2021 18:17:23

leoarcher
Admin
De: Arapiraca - AL
Registrado: 13/07/2006
Mensagens: 1.284
Website

Re: driver broadcom BCM43602 802.11ac não funciona

Irmão, tenta forçar o load do module através do insmod NOME_MODULO e vê se apresenta algum erro.
Veja no journalctl a mensagem de erro na hora do load do módulo durante o boot.


Se copiarem, forneçam a fonte de origem. Se alguma resposta te ajudou a solucionar o problema, por favor edite o título do tópico e adicione "[Resolvido]" a ele (sem as aspas). Obrigado!

Offline

Rodapé do site