Você não está autenticado.

Anúncio

Arch Linux Brasil está precisando de sua colaboração para realizar o pagamento do domínio e do host, para colaborar, realizar doações via paypal.

Para mais informações: contato at archlinux-br.org.

#1 23/06/2018 13:35:26

ghoost.user
Membro
De: São Paulo
Registrado: 23/06/2018
Mensagens: 2

[RESOLVIDO] Grub não quer atualizar resolução e nem tema.

Gente, me ajuda aqui, meu grub no Archlinux não quer atualizar a resolução e nem aceitar tema. O Grub está sendo iniciado com 800x600 (eu acho), e depois volta a resolução normal para mostrar o restante do carregamento verbose. Já mudei o "GRUB_GFXMODE=1366x768x24" no arquivo "/etc/default/grub" e a resolução não altera. Também quando vou adicionar um tema esse tema não carrega no Grub. E pra variar, esta com erros de caracteres no menu do Grub para letras especiais, como o "ç", "~", atribuindo um "?".

Eu não sei o que faço, já atualizei e instalei o grub com os comandos:

"grub-mkconfig -o /boot/grub/grub.cfg"
"grub-install /dev/sda"

Vejam como está meu arquivo "/etc/default/grub" e o "/etc/mkinitcpio.conf":

/etc/default/grub

# GRUB boot loader configuration

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR="Arch"
GRUB_CMDLINE_LINUX_DEFAULT="quiet"
GRUB_CMDLINE_LINUX="cryptdevice=/dev/mapper/linux-home:filehome"

# Preload both GPT and MBR modules so that they are not missed
GRUB_PRELOAD_MODULES="part_gpt part_msdos"

# Uncomment to enable booting from LUKS encrypted devices
GRUB_ENABLE_CRYPTODISK=y

# Uncomment to enable Hidden Menu, and optionally hide the timeout count
#GRUB_HIDDEN_TIMEOUT=5
#GRUB_HIDDEN_TIMEOUT_QUIET=true

# Uncomment to use basic console
# GRUB_TERMINAL_INPUT=console

# Uncomment to disable graphical terminal
# GRUB_TERMINAL_OUTPUT=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1366x768x24

# Uncomment to allow the kernel use the same resolution used by grub
# GRUB_GFXPAYLOAD_LINUX=keep

# Uncomment if you want GRUB to pass to the Linux kernel the old parameter
# format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
GRUB_DISABLE_RECOVERY=true

# Uncomment and set to the desired menu colors.  Used by normal and wallpaper
# modes only.  Entries specified as foreground/background.
#GRUB_COLOR_NORMAL="light-blue/black"
#GRUB_COLOR_HIGHLIGHT="light-cyan/blue"

# Uncomment one of them for the gfx desired, a image background or a gfxtheme
#GRUB_BACKGROUND="/path/to/wallpaper"
#GRUB_THEME="/path/to/gfxtheme"

# Uncomment to get a beep at GRUB start
# GRUB_INIT_TUNE="480 440 1"

# Uncomment to make GRUB remember the last selection. This requires to
# set 'GRUB_DEFAULT=saved' above.
#GRUB_SAVEDEFAULT="true"

/etc/mkinitcpio.conf

# vim:set ft=sh
# MODULES
# The following modules are loaded before any boot hooks are
# run.  Advanced users may wish to specify all system modules
# in this array.  For instance:
#     MODULES=(piix ide_disk reiserfs)

MODULES=(i915)

# BINARIES
# This setting includes any additional binaries a given user may
# wish into the CPIO image.  This is run last, so it may be used to
# override the actual binaries included by a given hook
# BINARIES are dependency parsed, so you may safely ignore libraries
BINARIES=()

# FILES
# This setting is similar to BINARIES above, however, files are added
# as-is and are not parsed in any way.  This is useful for config files.
FILES=()

# HOOKS
# This is the most important setting in this file.  The HOOKS control the
# modules and scripts added to the image, and what happens at boot time.
# Order is important, and it is recommended that you do not change the
# order in which HOOKS are added.  Run 'mkinitcpio -H <hook name>' for
# help on a given hook.
# 'base' is _required_ unless you know precisely what you are doing.
# 'udev' is _required_ in order to automatically load modules
# 'filesystems' is _required_ unless you specify your fs modules in MODULES
# Examples:
##   This setup specifies all modules in the MODULES setting above.
##   No raid, lvm2, or encrypted root is needed.
#    HOOKS=(base)
#
##   This setup will autodetect all modules for your system and should
##   work as a sane default
#    HOOKS=(base udev autodetect block filesystems)
#
##   This setup will generate a 'full' image which supports most systems.
##   No autodetection is done.
#    HOOKS=(base udev block filesystems)
#
##   This setup assembles a pata mdadm array with an encrypted root FS.
##   Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
#    HOOKS=(base udev block mdadm encrypt filesystems)
#
##   This setup loads an lvm2 volume group on a usb device.
#    HOOKS=(base udev block lvm2 filesystems)
#
##   NOTE: If you have /usr on a separate partition, you MUST include the
#    usr, fsck and shutdown hooks.

## Default 
HOOKS=(base udev autodetect modconf block encrypt lvm2 filesystems keyboard fsck)

# COMPRESSION
# Use this to compress the initramfs image. By default, gzip compression
# is used. Use 'cat' to create an uncompressed image.
#COMPRESSION="gzip"
#COMPRESSION="bzip2"
#COMPRESSION="lzma"
#COMPRESSION="xz"
#COMPRESSION="lzop"
#COMPRESSION="lz4"

# COMPRESSION_OPTIONS
# Additional options for the compressor
#COMPRESSION_OPTIONS=()

Aqui está a arvore de partições:

NAME          FSTYPE      LABEL                   UUID                                   MOUNTPOINT
loop1                                                                                    
sda                                                                                      
sda1          vfat                                035C-EF1C                              
sda2          ext4                                e3b99a32-a9c2-41dc-99c4-816822204cd9   /
sda3          LVM2_member                         fZSjI9-LmCN-5l9o-AAQp-qRwi-SkfO-NChCTG 
linux-swap    swap                                d0f5aed7-a7b1-4178-82ba-7e22926c926f   [SWAP]
linux-home   crypto_LUKS                         f8f2f3d0-4d57-477e-8a74-7a8b0d7ef15f 

lspci

00:00.0 Host bridge: Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09)
00:16.0 Communication controller: Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4)
00:1c.3 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 4 (rev b4)
00:1c.5 PCI bridge: Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4)
00:1d.0 USB controller: Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation HM65 Express Chipset Family LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 6 Series/C200 Series Chipset Family 6 port Mobile SATA AHCI Controller (rev 04)
00:1f.3 SMBus: Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
07:00.0 Network controller: Qualcomm Atheros AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
0d:00.0 Unassigned class [ff00]: Realtek Semiconductor Co., Ltd. RTS5209 PCI Express Card Reader (rev 01)
13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)

Só tenho o Archlinux instalado e minha Home (criptografada) e Swap na partição LVM pra eu aumentar ou diminuir.

Será que é algum pacote que falta eu instalar?

Fico muito feliz se conseguirem me ajudar hmm

Última edição por ghoost.user (26/06/2018 20:01:16)

Offline

#2 24/06/2018 22:43:58

swatquest
Moderador
Registrado: 05/10/2010
Mensagens: 1.962

Re: [RESOLVIDO] Grub não quer atualizar resolução e nem tema.

deixe assim
GRUB_GFXMODE=1366x768

sobre o ç vc definiu o teclado

nano /etc/vconsole.conf
adicione
KEYMAP=br-abnt2

ou

https://bbs.archlinux.org/viewtopic.php?id=65762

Offline

#3 26/06/2018 20:00:50

ghoost.user
Membro
De: São Paulo
Registrado: 23/06/2018
Mensagens: 2

Re: [RESOLVIDO] Grub não quer atualizar resolução e nem tema.

swatquest escreveu:

deixe assim
GRUB_GFXMODE=1366x768

sobre o ç vc definiu o teclado

nano /etc/vconsole.conf
adicione
KEYMAP=br-abnt2

ou

https://bbs.archlinux.org/viewtopic.php?id=65762


Oi, obrigado por responder smile

Então, eu defini o teclado sim, e também já tinha definido o "GRUB_GFXMODE=1366x768". Felizmente eu consegui descobrir o erro.

Instalei uns pacotes de fonts do xorg e e realizei o update do grub com o "Grub Customizer" e voltou ao normal as fontes com UTF-8 e resolução do monitor.

Não sei o que ouve, pois sempre instalei o Arch e nunca tive essa dificuldade, por isso que amo essa distro, porque se aprende cada vez mais.


Grato big_smile

Offline

#4 30/09/2021 07:25:03

jiuer784
Membro
Registrado: 30/09/2021
Mensagens: 5

Re: [RESOLVIDO] Grub não quer atualizar resolução e nem tema.

https://www.travisscott-jordan1.com/ Travis Scott Jordan 1
https://www.yeezyshoesyeezy.com/ Yeezy Shoes
https://www.yeezy-supplys.com/ Yeezy Supply
https://www.airsjordans.com/ Air Jordans
https://www.jordan-11s.com/ Jordan 11s
https://www.jordans-11.com/ Jordan 11
https://www.jordansshoes.org/ Jordans Shoes
https://www.moncler-outlets.com/ Moncler Outlet
https://www.off-white.us.org/ Off-White
https://www.yeezy-450.com/ Yeezy 450
https://www.yeezys500.com/ Yeezy 500
https://www.yeezyyeezy.com/ Yeezy
https://www.yeezys-700.com/ Yeezy 700
https://www.yeezys-supply.com/ Yeezy Supply
https://www.offwhiteshoess.com/ Off White Shoes
https://www.nflsjerseys.us.com/ NFL Jerseys
https://www.retro-jordan.com/ Retro Jordans
https://www.monclerjackets.us.com/ Moncler Jackets
https://www.nikeair-jordan.com/ Nike Air Jordan
https://www.jordanshoes.org/ Jordan Shoes
https://www.jordans-shoes.com/ Jordans Shoes
https://www.yeezy350-v2.com/ Yeezy 350 V2
https://www.adidasyeezys.com/ Adidas Yeezy
https://www.yeezyoutlet.us.com/ Yeezy
https://www.yeezy-700.us.com/ Yeezy 700
https://www.yeezyv2.us.com/ Yeezy
https://www.nike-outlets.com/ Nike Outlet
https://www.yeezy-shoes.us.com/ Yeezy Shoes
https://www.yeezyfoam-runner.com/ Yeezy Foam Runner
https://www.nikestoreoutlet.us.com/ Nike Outlet
https://www.nikeoutletfactory.us/ Nike Outlet
https://www.aj1.us.com/ AJ1
https://www.uncjordan1.us/ UNC Jordan 1
https://www.jordan-13.us/ Jordan 13
https://www.jordanaj1.com/ Jordan AJ 1
https://www.yeezy-supply.com/ Yeezy Supply
https://www.yeezy-zebra.com/ Yeezy Zebra
https://www.jordan-5.us Jordan 5
https://www.jordan1low.com/ Jordan 1 Low
https://www.air-jordans.us.org/ Air Jordans
https://www.pandoracharms.uk.com/ Pandora Charms
https://www.adidasuk.uk.com/ Adidas UK
https://www.nikestoreoutlet.us.com/ Nike Store
https://www.adidasyeezyofficialwebsite.com/ Adidas Yeezy Official Website
https://www.yeezy350.us.com/ Yeezy 350
https://www.jordan1.uk.com/ Jordan 1
https://www.nikesoutlet.us.com/ Nike Outlet
https://www.supplyyeezys.us/ YEEZY SUPPLY
https://www.pandoracharms.cc/ Pandora Charms
https://www.nikeshoes.cc/ Nike Shoes
https://www.nikeoutlet.uk.com/ Nike Outlet
https://www.pandoras-jewelry.com/ Pandora Jewelry
https://www.pandoraoutlet.org/ Pandora Outlet
https://www.jordanshoess.com/ Jordan Shoes
https://www.air-jordan4.com/ Air Jordan 4
https://www.charms-pandora.com/ Pandora Charms
https://www.pandorajewelryusa.us.com/ Pandora Jewelry
https://www.ringspandora.com/ Pandora Rings
https://www.bracelets-pandora.com/ Pandora Bracelets
https://www.yeezy-adidas.us.com/ Adidas Yeezy
https://www.yzy.us.com/ Yeezy
https://www.charmspandora.us.com/ Pandora Charms
https://www.nikeoutletstore.us.com/ Nike Outlet
https://www.adidas-yeezy.org/ Adidas Yeezy
https://www.airmax-720.com/ Air Max 720
https://www.nike-airmax270.com/ Nike Air Max 270
https://www.air-jordan11.com/ Air Jordan 11
https://www.air-force1.com/ Air Force 1
https://www.air-jordan1.com/ Air Jordan 1
https://www.nike-jordans.com/ Nike Jordans
https://www.jordan-1s.com/ Jordan 1s
https://www.pandorauk.uk.com/ Pandora UK
https://www.nikejordan1.com/ Nike Jordan 1
https://www.nikeairvapormaxflyknit3.us/ Nike Air VaporMax Flyknit 3
https://www.jordan-1.org/ Jordan 1
https://www.jordan11.org/ Jordan 11
https://www.yeezyslides.us.com/ Yeezy Slides
https://www.nikeairvapormax.us/ Nike Air VaporMax
https://www.nikevapormaxflyknit.com/ Nike Vapormax Flyknit
https://www.airjordan1-mid.com/ Air Jordan 1 Mid
https://www.yeezyadidas.de/ Adidas yeezy
https://www.yeezy-shoess.com/ Yeezy Shoes
https://www.adidasyeezy.me.uk/ Adidas Yeezy
https://www.yeezy350.de/ Yeezy 350
https://www.nikes.us.com/ Nike Shoes
https://www.nikeoutletstoreonlineshopping.us/ Nike Outlet
https://www.yeezystore.us.com/ Yeezy
https://www.nflshopofficialonlinestore.com/ NFL Shop Official Online Store
https://www.nikeuk.uk.com/ Nike UK
https://www.yeezy.uk.com/ Yeezy
https://www.yeezy350.uk.com/ Yeezy 350

Offline

Rodapé do site